Hi,

Yes you can add more if you have a Visual Micro Plus license but you don't need to...

Thanks for the post about the Edison.

If you look at the list of Ides' in Visual Micro do you not see the Intel option? This option was tested with the Galileo and is based on 1.5.3

Maybe it needs another test for the Edison.

Thanks

Sorry I think I must be missing the point or maybe a misunderstanding

You can enter a different path for each Ide.

When a project is open you can easily pick the Ide and Board from the tool bar

When you save the project the Ide and Board are retained so you only have to select this once per project normally.

Did you think that you had to clear the path from the Arduino 1.0.x or 1.5.x to configure the Intel option? Is that is not the case. You can have all of the Ide types configured with locations.

I hope this makes sense?

Hi,

There is no difference between edison or arduino projects. You can switch any project between ide and board at anytime and the sketch will compile as long as the source code and libraries are compatible with the selected hardware.

To start a new project use "file>new>sketch project" or File>Open>Sketch project to open/create a project from an existing sketch.ino