Jan 12th, 2026 at 1:53pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › Open Sketch not working
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Open Sketch not working (Read 3957 times)
drpeej
Junior Member
**
Offline


Posts: 27
Location: UK
Joined: Dec 22nd, 2013
Open Sketch not working
Oct 2nd, 2014 at 11:57am
Print Post  
I have recently upgraded to Atmel Studio 6.2 and VM 1.1407.10.

I wish I hadnt bothered as I haven't been able to get anything to compile since  Angry

While trying to sort this out a very strange and new issue has occurred.  I cannot open a sketch.

If I use File->Open->Sketch Project nothing happens.  I expect to see a browser window but nothing appears.  It worked when I first did the installation but since I did a VM repair installation it has stopped working.  If I use File->Open->Project/Solution then it opens the browser as expected.

I have tried uninstalling AS6.2 and VM and re-installing but I get the same problem.  I can't get to the bottom of my compile issue until I can load a sketch.

What is going on?
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12204
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Open Sketch not working
Reply #1 - Oct 2nd, 2014 at 12:14pm
Print Post  
Hi Sorry to hear of this issue.

Please look at tools>addin manager to see if visual micro is enabled.

Please confirm if you have a tool bar with boards showing?

Please report your visual micro version number in tools>options>visual micro>version

Please confirm what your sketch folder is configured to be in the Ide locations

Please confirm which version of arduino you are using?

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
drpeej
Junior Member
**
Offline


Posts: 27
Location: UK
Joined: Dec 22nd, 2013
Re: Open Sketch not working
Reply #2 - Oct 2nd, 2014 at 12:40pm
Print Post  
Yes VM is enabled
Yes there is a toolbar
Version is 1.1407.10
Sketch folder OK
Arduino 1.0.5

BUT - I discovered that the toolbar was set to Arduino 1.5.x

Setting it to 1.0.x seems to have fixed the problem  Smiley 

Peter
  
Back to top
 
IP Logged
 
drpeej
Junior Member
**
Offline


Posts: 27
Location: UK
Joined: Dec 22nd, 2013
Re: Open Sketch not working
Reply #3 - Oct 2nd, 2014 at 12:45pm
Print Post  
BONUS!!!!

My compile problem is now fixed   Grin
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12204
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Open Sketch not working
Reply #4 - Oct 2nd, 2014 at 5:22pm
Print Post  
If you are not using arduino 1.5.x I suggest you clear the path in the Ide locations dialog. You must have set it by accident. Removing the path will remove 1.5 from the list and prevent confusion.

It also sounds like you configured the arduino 1.0 ide against the Arduino 1.5.x option which would cause Visual Micro to fail.

« Last Edit: Oct 2nd, 2014 at 5:24pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.