Hello
as said in subject, Visual Micro do not recognize AVRMKII programmer.
When I try to upload it return this message:


Uploading to I/O board using 'AVRISP mkII'
Uploader started for board Arduino Uno
Uploader sometimes uses programmer name: avrispmkii
Uploader will attempt to use programmer name: avrispmkii
C:\Program Files\Arduino\hardware\tools\avr\bin\avrdude -C"C:\Program Files\Arduino\hardware/tools/avr/etc/avrdude.conf" -v -v -v -v -patmega328p -cstk500v2 -Pusb o\IRrelay.hex":i
avrdude: Version 5.11, compiled on Sep  2 2011 at 19:38:36
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "C:\Program Files\Arduino\hardware/tools/avr/etc/avrdude.conf"

         Using Port                    : usb
         Using Programmer              : stk500v2
avrdude: usbdev_open(): did not find any USB device "usb"

of course...

I had selected 
TOOLS-->Visual Micro-->Programmers-->AVRISP mkII
TOOLS-->Visual Micro-->Upload using Programmer

instead it see STK500

Arduino 1

no, also arduino have problem. 
I use for upload Atmel Studio but I would avoid to open huge program only for upload

you think that if it work with arduino it will work also with visual micro?