VS Arduino - AVRISP MkII - How to get it working with Visual Micro

May 3^rd, 2025 at 3:31pm (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › Installation & Troubleshooting › AVRISP MkII - How to get it working with Visual Micro

‹ Previous Topic | Next Topic ›

Pages: 1

AVRISP MkII - How to get it working with Visual Micro (Read 2130 times)

Azhar Newbies Offline Posts: 1 Joined: Nov 22^nd, 2014	AVRISP MkII - How to get it working with Visual Micro Nov 22^nd, 2014 at 11:37am	Print Post
	Hi I'm trying to upload an Arduino sketch to my breadboard using an AVRISP MkII but the IDE insists on having an assigned COM port which it's not as it's using the Jungo driver. Can this work somehow? Much appreciated for any help. Azhar


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12186 Location: United Kingdom Joined: Apr 10^th, 2010	Re: AVRISP MkII - How to get it working with Visual Micro Reply #1 - Nov 22^nd, 2014 at 2:05pm	Print Post
	1 .Jungo is not supported by the arduino avrisp tool. You have to select the Atmel version from the programmers list 2. Select the correct programmer from the programmers list tools>visual micro>programmers 3. Tick "Tools>visual micro>Upload using programmer" 4. Press F5 or upload anyway you like


	WWW Facebook Twitter YouTube IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›