May 27th, 2025 at 6:28pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Amtel Studio 6.2 does not compile for the corect board
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Amtel Studio 6.2 does not compile for the corect board (Read 3028 times)
BruceV
Newbies
*
Offline


Posts: 2
Joined: Jan 5th, 2015
Amtel Studio 6.2 does not compile for the corect board
Jan 5th, 2015 at 3:12am
Print Post  
I have the Mega board and serial port selected in the Visual Micro pull downs but Atmel Studio is compiling for Uno.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Amtel Studio 6.2 does not compile for the corect board
Reply #1 - Jan 5th, 2015 at 10:58am
Print Post  
Hi Bruce

If you select a different board then re-select the mega does that solve the issue?

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
BruceV
Newbies
*
Offline


Posts: 2
Joined: Jan 5th, 2015
Re: Amtel Studio 6.2 does not compile for the corect board
Reply #2 - Jan 5th, 2015 at 1:08pm
Print Post  
Yep, fixed it.

Wish everything was that easy.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Amtel Studio 6.2 does not compile for the corect board
Reply #3 - Jan 5th, 2015 at 1:19pm
Print Post  
Great, it happens every so often mainly when changing ide. It's a bug we need to find.

Thanks for the update, remember the board selection is saved to the project file so you must click Yes to save changes when prompted, otherwise your new selection will not be saved and it will happen again the next time you open the ide.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.