Jun 2nd, 2025 at 3:42pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › Zero boards for Teensy 1.0
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Zero boards for Teensy 1.0 (Read 2729 times)
Ralph Berner
Newbies
*
Offline


Posts: 9
Joined: Apr 19th, 2015
Zero boards for Teensy 1.0
May 15th, 2015 at 6:41pm
Print Post  
I installed Arduino 1.6.4, Teensyduino 1.23 and Visual Micro "Release Candidate (1505.15)"
I configured in Visula Micro in Preferences / Applications & Locations the path to the Arduino IDE (C:\Arduino\) for Arduino 1.6 as well as for Teensy 1.0.
The Visual Micro Menu shows "0 boards..." for Teensy 1.0.
The help shows "Invalid ide location(s). Pleas configure the correct location(s) for Teensy 1.0"

Any ideas? 
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12191
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Zero boards for Teensy 1.0
Reply #1 - May 15th, 2015 at 6:46pm
Print Post  
Hi,

The Teensy 1.0 entry if for an install of Arduino 1.0.6 not 1.6.x

The new Teensy stuff is currently only supported with Arduino 1.0.6 Ide

We will be adding 1.6.4 for Teensy over the next few weeks.

You can see the current level of support for Teensy here http://www.visualmicro.com/page/Teensy-for-Microsoft-Visual-Studio.aspx

When we support Teensy for 1.6.4 you will use the Arduino 1.6 option. 

You can have more than one Ide installed at any one time by using the portable version of the arduino ide (zip). You don't need to run the Arduino installer again.

Thanks

« Last Edit: May 15th, 2015 at 6:48pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Ralph Berner
Newbies
*
Offline


Posts: 9
Joined: Apr 19th, 2015
Re: Zero boards for Teensy 1.0
Reply #2 - May 16th, 2015 at 3:16am
Print Post  
Thanks  Smiley
I guessed it might be something like that.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.