Mar 17th, 2026 at 3:20pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › App project and Sketch project in one
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic App project and Sketch project in one (Read 2732 times)
jrich
Newbies
*
Offline


Posts: 1
Joined: Jun 26th, 2015
App project and Sketch project in one
Jun 26th, 2015 at 6:13pm
Print Post  
I was just screwing around with this, and wrote a simple sketch to pull the temp and dump it to the serial port with a project called TempSketch, which when i hit F5 will build and upload.

Now I want to read it so I added a C# project to this solution called TempApp and set it to the startup project.

So now i cant just Build All to have it upload I have to build/run the sketch and then build run the app... 

it would be nice if i could just do some sort of dependency between the two and have it upload as part of the process.

i tried to set multiple startup projects, but it basically looks for an exe so that doesnt work.

is there any way to do this?

Thanks,
Jusitn
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12204
Location: United Kingdom
Joined: Apr 10th, 2010
Re: App project and Sketch project in one
Reply #1 - Jun 26th, 2015 at 7:55pm
Print Post  
Hi,

Vs only ever has one "start-up" project, you select which of the projects is startup so it can be run and debugged. You can also right click any of the projects and "start a new instance". 

It's also possible to open multiple instances of visual studio, one for each project. This makes most sense because then you can debug both projects at the same time.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.