VS Arduino - ATTINY in visual micro

May 2^nd, 2025 at 6:37am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › Other Hardware › ATTINY in visual micro

‹ Previous Topic | Next Topic ›

Pages: 1

ATTINY in visual micro (Read 6345 times)

Trek19 Junior Member Offline Posts: 91 Location: UK Joined: Dec 2^nd, 2013	ATTINY in visual micro Dec 10^th, 2015 at 10:12am	Print Post
	I am just restarting my development using visual micro having upgraded my computer and Visual studio and wondered if there is a new way of adding support for ATTINY boards. I used to copy files into the boards folder which was all a bit messy.


	IP Logged

Trek19 Junior Member Offline Posts: 91 Location: UK Joined: Dec 2^nd, 2013	Re: ATTINY in visual micro Reply #1 - Dec 10^th, 2015 at 5:35pm	Print Post
	OK I just found the answer to my question at: http://playground.arduino.cc/Main/ArduinoOnOtherAtmelChips with details of how to do it here: https://github.com/SpenceKonde/ATTinyCore


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12186 Location: United Kingdom Joined: Apr 10^th, 2010	Re: ATTINY in visual micro Reply #2 - Dec 10^th, 2015 at 8:20pm	Print Post
	Thanks for the update. Yes you can either use the Board manager or unzip into a folder below mydocument/arduino/hardware. The Visual Micro explorer provides a quick way to auto unpack a hardware core .zip into the correct location and you will also see Board manager and Library Manager tabs


	WWW Facebook Twitter YouTube IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›