Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
 
Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic crumbuino128 merged hardware definition compiler expects project_name.hex (Read 2198 times)
BeagleBot
Junior Member
**
Offline


Posts: 19
Location: Netherlands
Joined: Jul 8th, 2015
crumbuino128 merged hardware definition compiler expects project_name.hex
Feb 4th, 2016 at 7:59pm
Print Post  
Way is my compiled .hex file has a different name then my sketch name
Example: sketch name blink
Compiled: blink.ino.hex
avrdude: can't open input file x: 
No such file or directory
« Last Edit: Feb 4th, 2016 at 9:32pm by Tim@Visual Micro »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12191
Location: United Kingdom
Joined: Apr 10th, 2010
Re: crumbuino128 merged hardware definition compiler expects project_name.hex
Reply #1 - Feb 4th, 2016 at 9:30pm
Print Post  
The hardware was designed for arduino 1.5 and should not really be used with Arduino 1.6. There might be some other conflict with other installed hardware but I have explained how to give a build output report and also a workaround in your other thread 

btw: The solution should be the same as for the other thread
« Last Edit: Feb 4th, 2016 at 10:20pm by Tim@Visual Micro »  
Back to top
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint