VS Arduino - Add the option to set DTS/RTS in the serial monitor

May 11^th, 2025 at 9:02am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › Ideas, Suggestions and Related Tools › Add the option to set DTS/RTS in the serial monitor

‹ Previous Topic | Next Topic ›

Pages: 1

Add the option to set DTS/RTS in the serial monitor (Read 6577 times)

SqueakySquak Newbies Offline Posts: 2 Joined: Mar 27^th, 2016	Add the option to set DTS/RTS in the serial monitor Mar 27^th, 2016 at 5:13pm	Print Post
	Hello, I've been using Visual Micro addin for VS2015 and I noticed a slight issue with my NodeMCU. When I use Visual Micro serial monitor, it prevents the ESP8266 from resetting itself, which means it will execute its program once, reset and stop. If I use the Arduino serial monitor, this issue doesn't apply; using RealTerm I've come to the conclusion that it must be the DTS/RTS lines that have to be kept high for the ESP to perform deep sleep and reset correctly. It would be great if we could set the DTS/RTS lines in the monitor (there is already a Dtr toggle but its tooltip is confusing). Keep up the good work


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12187 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Add the option to set DTS/RTS in the serial monitor Reply #1 - Mar 27^th, 2016 at 6:58pm	Print Post
	Thanks, I'll take a look to see if there are some new build config flags


	WWW Facebook Twitter YouTube IP Logged

Tim@Visual Micro Administrator Offline Posts: 12187 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Add the option to set DTS/RTS in the serial monitor Reply #2 - Mar 28^th, 2016 at 2:11pm	Print Post
	An rts checkbox has been added to the monitor for the next release. The tool tips have been improved. Arduino boards historically auto-reset with dtr enabled and do not use the rts. Q: What cable are you using and how are you connecting for the auto reset to work with the esp8266?


	WWW Facebook Twitter YouTube IP Logged

SqueakySquak Newbies Offline Posts: 2 Joined: Mar 27^th, 2016	Re: Add the option to set DTS/RTS in the serial monitor Reply #3 - Mar 28^th, 2016 at 2:17pm	Print Post
	It seems NodeMCU is using DTR/RTS for their ESP8266 module, you can have a look at the schematic here https://raw.githubusercontent.com/nodemcu/nodemcu-devkit/master/Documents/NODEMC.... Note that the components in the schematic differ a bit from models to models; I have one with a CP2102 on it.


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12187 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Add the option to set DTS/RTS in the serial monitor Reply #4 - Apr 28^th, 2016 at 10:05am	Print Post
	Rts was in the release a week or two ago. A problem with Dtr was fixed in yesterdays release


	WWW Facebook Twitter YouTube IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›