May 2nd, 2025 at 7:52am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Visual Studio 2017, 2019, 2022 › Board Selection Issue
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Board Selection Issue (Read 1460 times)
Gavin Hill
Newbies
*
Offline


Posts: 2
Joined: Jul 2nd, 2016
Board Selection Issue
Jul 28th, 2016 at 2:08pm
Print Post  
I have an Arduino Pro Mini 328 3.3V board.   
If I upload a basic sketch via the Arduino IDE, it works without issue.   
If I upload the same sketch via VM it produces garbage in the serial monitor.   
If I change the board choice in VM to "Arduino Pro or Pro Mini w/ ATmega 328 5V" (instead of the 3.3V version) then the sketch works correctly and produces the expected output in the serial monitor.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.