May 23rd, 2025 at 7:20pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Teensy 3.5 & 3.6
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 8 Replies) Teensy 3.5 & 3.6 (Read 9590 times)
iambrentiam
Newbies
*
Offline


Posts: 2
Joined: Sep 2nd, 2016
Teensy 3.5 & 3.6
Sep 2nd, 2016 at 5:33pm
Print Post  
Hi - 

When will the new Teensy 3.5 & 3.6 boards be supported?

Thanks!
Brent
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Teensy 3.5 & 3.6
Reply #1 - Sep 2nd, 2016 at 6:13pm
Print Post  
Are they not already? Have you tried? Do you have a verbose compiler out of a problem?
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
iambrentiam
Newbies
*
Offline


Posts: 2
Joined: Sep 2nd, 2016
Re: Teensy 3.5 & 3.6
Reply #2 - Sep 2nd, 2016 at 6:16pm
Print Post  
I have not tried. Smiley I just did not see it mentioned anywhere so I was not sure the status. I am looking forward to trying it when I get my boards from the Kickstarter next month!

Thanks,
Brent
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Teensy 3.5 & 3.6
Reply #3 - Sep 2nd, 2016 at 6:35pm
Print Post  
Hi,

Visual Micro reads the Arduino and OEM hardware configuration files. They all work to the published Arduino.cc 3rd part hardware standard so in a perfect world the hardware will work without change to visual micro.

Obviously the world isn't always perfect because the arduino standard is maturing all the time and some features such as debugging can often require a slight config change for new architectures.

So please do report back after you try it. Any problems will be easy to resolve.

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Teensy 3.5 & 3.6
Reply #4 - Sep 2nd, 2016 at 6:56pm
Print Post  
I just tried it and it works ok Smiley

If you get one and find it supports jtag or ano debug then please let me know.
« Last Edit: Sep 2nd, 2016 at 6:57pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
zero ohm
Newbies
*
Offline


Posts: 2
Joined: Sep 9th, 2016
Re: Teensy 3.5 & 3.6
Reply #5 - Sep 9th, 2016 at 10:55pm
Print Post  
what jtag debuger hardware did you use to debug teensy 3.6 with studio 7 and what connector pinout to make it work?
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Teensy 3.5 & 3.6
Reply #6 - Sep 9th, 2016 at 10:59pm
Print Post  
Hi,

This thread wasn't discussing debugging it was a question if building and uploading for Teensy 3.5/3.6 was supported.

My understanding is that Teensy doesn't support hardware debug yet but it's changing fast so please let me know if you find that isn't the case.

Maybe you can ask on the pjrc.com forum and let us know the answer?

In the meantime you should be able to use the Visual Micro software debugger if you have a com port configured.

Thanks
« Last Edit: Sep 9th, 2016 at 10:59pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
zero ohm
Newbies
*
Offline


Posts: 2
Joined: Sep 9th, 2016
Re: Teensy 3.5 & 3.6
Reply #7 - Sep 10th, 2016 at 3:54pm
Print Post  
There are 3 pins on the bottom for Hardware debug  but I have no idea how to use them I own the atmel ice but need to find out how to wire it in. It can do the do the SAMD parts which are jtag.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Teensy 3.5 & 3.6
Reply #8 - Sep 10th, 2016 at 4:06pm
Print Post  
It will be interesting to find out if they are jtag or swd etc. Maybe a Segger will work.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.