VS Arduino - ESP8266 OTA-WiFi Debug Release

Apr 20^th, 2024 at 11:10am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › Usb/Serial/WiFi Debugging › ESP8266 OTA-WiFi Debug Release - BETA

‹ Previous Topic | Next Topic ›

Pages: 1

ESP8266 OTA-WiFi Debug Release - BETA (Read 2954 times)

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	ESP8266 OTA-WiFi Debug Release - BETA Dec 6^th, 2016 at 10:29pm	Print Post
	ESP8266 NOTE: December 2017 - WiFi (with OTA) Debug Beta has been released. Update of variables during debug is not yet supported. Uses UDP messaging. Breakpoints and debugging auto-deactivate when a debug session ends. To upload with USB and debug with WiFi set the "Remote Transport" project property to "Udp" and the "Local Port" to the IpAddress. For OTA devices there is no configuration required except to switch the tool bar from "Release" to "Debug". It is also recommended to switch on "vMicro>Debugger>Full Speed". Beta - Do not use with remote devices that can not be manually reset. more to follow! tip: After first upload of OTA the esp devices require a hard reset... Click the reset button on the board OR cycle the power OR toggle the RTS checkbox On then OFF in the serial monitor.
	« Last Edit: Apr 3^rd, 2018 at 1:54pm by Tim@Visual Micro »

	WWW IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›