May 11th, 2025 at 3:31pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Visual Studio 2017, 2019, 2022 › Micro disassembly doesn't work teensy 3.2
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Micro disassembly doesn't work teensy 3.2 (Read 2949 times)
hrudyusa
Newbies
*
Offline


Posts: 1
Joined: Jan 28th, 2017
Micro disassembly doesn't work teensy 3.2
Jan 28th, 2017 at 12:32am
Print Post  
I am running a test project for this board. I would like to get disassembly information but all I get is Error:
I *did* follow the directions to get disassembly 
It probably would help if I could get the command stream to gcc for this board.
AFAIK the other features seem to work
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12187
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Micro disassembly doesn't work teensy 3.2
Reply #1 - Jan 28th, 2017 at 7:16pm
Print Post  
Thanks for the report.

Disassembly view for more recent teensy hardware definitions has been added to the next release due over the next few days
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12187
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Micro disassembly doesn't work teensy 3.2
Reply #2 - Feb 6th, 2017 at 2:18am
Print Post  
There is a link to the next release at the top of this post if you want to try it.

« Last Edit: Feb 6th, 2017 at 2:19am by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
g8jcf
Newbies
*
Offline


Posts: 1
Joined: Mar 31st, 2017
Re: Micro disassembly doesn't work teensy 3.2
Reply #3 - Mar 31st, 2017 at 11:47pm
Print Post  
That works - VERY WELL - thanks.

Peter
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.