Jun 26th, 2026 at 7:46am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Visual Studio 2019, 2022, 2026 › Uploading to Aruduino Micro 32u4
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Uploading to Aruduino Micro 32u4 (Read 2599 times)
thinwingflyer
Newbies
*
Offline


Posts: 1
Joined: Jun 13th, 2017
Uploading to Aruduino Micro 32u4
Jun 14th, 2017 at 4:21am
Print Post  
Uploading to this board bricks it everytime.  It's destroyed 4 different boards and the bootloader trick by hitting the reset button doesn't fix it.  Is this a known bug??  The Arduino IDE does works fine, but using Visual Micro with Visual Studio 15 kills these boards.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12205
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Uploading to Aruduino Micro 32u4
Reply #1 - Jun 14th, 2017 at 9:51am
Print Post  
No not a known bug. You can use an Uno or other board as ISP and re-burn the bootloaders

Switch on "vMicro>Compiler>Verbose" and "vMicro>Compiler>Show Build Properties" then build and post the output at .txt thenw e can see which board and what is installed

What is the program size after build?

Thanks





« Last Edit: Jun 14th, 2017 at 9:52am by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12205
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Uploading to Aruduino Micro 32u4
Reply #2 - Jun 26th, 2017 at 12:30pm
Print Post  
Sorry for the delay. 

Investigation showed that the "program too large warning" that prevents upload of arduino programs that are too large was missing from the last few versions of visual micro. This is resolved in the latest release due to be published over the next 24 hours.


I assume you were building with visual micro in debug mode. That is the only way your program size could be larger than that produced by the arduino ide hence the difference between the two upload processes. 

So thanks for the report and if you email info@visualmicro.com with a link to this post I will provide you with free licences for visual micro pro.

Thanks for the report and sorry for the confusion.

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.