Dec 5th, 2025 at 1:51pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › Arduino M0 - Avrdude: Programmer is not responding
‹ No Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 8 Replies) Arduino M0 - Avrdude: Programmer is not responding (Read 15936 times)
Phil D
Newbies
*
Offline


Posts: 7
Joined: May 11th, 2015
Re: Arduino M0 - Avrdude: Programmer is not responding
Reply #20 - Nov 30th, 2025 at 2:14pm
Print Post  
Okay, my quick dirty fix for this, which means I can upload normally now from Visual Micro was to edit the boards.txt file at:

C:\Users\Phil\AppData\Local\Arduino15\packages\arduino\hardware\samd\1.8.14

Find the entry for the board in question in the board.txt file, in my case it was Arduino M0 and simply add -u after the protocol then restart Visual Studio

Code
Select All
mzero_bl.upload.protocol=stk500v2 -u


This then gets added to the command line, and uploads are all working without the long delays.
  
Back to top
 
IP Logged
 
Phil D
Newbies
*
Offline


Posts: 7
Joined: May 11th, 2015
Re: Arduino M0 - Avrdude: Programmer is not responding
Reply #21 - Nov 30th, 2025 at 2:18pm
Print Post  
Tim@Visual Micro wrote on Jun 28th, 2017 at 1:51pm:
Great thanks. That helps. It is either a problem with the working directory or with the stray -V in the command

1)
Please try this, I have removed a stray -V

Code
Select All
.3.0-arduino9\bin\avrdude  e\6.3.0-arduino9/etc/avrdude.conf" -v -v -patmega2560 -cstk500v2 -PCOM15 -b57600 lease/JouleTest.ino.hex:i"


2)
Then change to the arduino.exe folder and try it again. By running from the arduino ide folder the working directory will be different.



Thanks very much!


I wonder if that stray -v should actually be a -u  (see above posts) 
« Last Edit: Nov 30th, 2025 at 2:18pm by Phil D »  
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2822
Joined: Feb 13th, 2019
Re: Arduino M0 - Avrdude: Programmer is not responding
Reply #22 - Dec 1st, 2025 at 12:26pm
Print Post  
Thanks for the update and we will look at adding this in for the M0 / M0 Pro Boards, and update this thread when it is released for download.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2822
Joined: Feb 13th, 2019
Re: Arduino M0 - Avrdude: Programmer is not responding
Reply #23 - Dec 3rd, 2025 at 3:08pm
Print Post  
We have added this fix into the latest version of vMicro (25.1009.3) for the M0/M0Pro Arduino Boards, which can be downloaded from the top of the below board:
https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ No Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.