May 23rd, 2025 at 8:23am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › Build problems with 'SkynetV2.3.2' for 'Anet V1.0'
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Build problems with 'SkynetV2.3.2' for 'Anet V1.0' (Read 2960 times)
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Build problems with 'SkynetV2.3.2' for 'Anet V1.0'
Dec 23rd, 2017 at 1:58pm
Print Post  
I have raised this report in response to an email report of a debug compile failure. 

1)

Please confirm if the compile issues happens in Release mode?

2)

In the links that you emailed, the zip of the arduino sketch program also included a special version of the arduino ide.

It is not clear from the report which arduino ide was being used for the test that worked and which arduino ide is configured in visual micro?


Please answer questions 1 and 2

Thanks

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
GeorgK
Newbies
*
Offline


Posts: 2
Location: Germany
Joined: Jan 14th, 2018
Re: Build problems with 'SkynetV2.3.2' for 'Anet V1.0'
Reply #1 - Jan 14th, 2018 at 10:07am
Print Post  
Hello
Please excuse the late reply, I was very busy.

I sent you all the information and also a link to my development environment. Have you generated your own environment?
Did you have the same problems?

If you have not created the appropriate development environment for your tests, going further with this issue will no longer make sense to me.

This would then mean that I have to rethink whether I can recommend your product to our customers.
This would be a pity, since I was always satisfied with your product and service. Undecided

Best regards

George
  
Back to top
 
IP Logged
 
GeorgK
Newbies
*
Offline


Posts: 2
Location: Germany
Joined: Jan 14th, 2018
Re: Build problems with 'SkynetV2.3.2' for 'Anet V1.0'
Reply #2 - Jan 16th, 2018 at 10:22pm
Print Post  
1. I have the same problems in release mode as well.



2. I use a standard Arduino IDE version: 1.8.1.
      Here is a link to a ZIP file 
this is my Arduino environment I use.
      http://gkellerhoff.de/Transfer/Arduino.zip
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Build problems with 'SkynetV2.3.2' for 'Anet V1.0'
Reply #3 - Jan 28th, 2018 at 12:30am
Print Post  
Please switch on vMicro>Compiler>Verbose and also "Show build properties" which is on the same menu.

Then click "Build>Clean Solution"

Then click Build and then copy the output into a .txt file and email to info[at]visualmicro.com along with a link to this post.

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.