Jun 20th, 2025 at 7:04am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › Recycle Bin › Serial terminal: proper processing of CR/LF characters
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Serial terminal: proper processing of CR/LF characters (Read 665 times)
SeNS
Newbies
*
Offline


Posts: 0
Location: Boston, US
Joined: Oct 17th, 2018
Serial terminal: proper processing of CR/LF characters
Oct 17th, 2018 at 7:16pm
Print Post  
This will be a really good and useful feature to have proper processing CR/LF from the inbound serial traffic (i.e. received from the board), as it supposed to be for the normal terminal.

So, CR (carriage return) should return (caret/insertion position) to the beginning of a line, and LF (line feed) should do line feed. Simple, isn't it? 

But this feature will help to proper format serial output - sometimes it's pretty useful for debugging. 

Thanks a lot!

WBR, SeNS
  
Back to top
 
IP Logged
 
SeNS
Newbies
*
Offline


Posts: 0
Location: Boston, US
Joined: Oct 17th, 2018
Re: Serial terminal: proper processing of CR/LF characters
Reply #1 - Oct 17th, 2018 at 7:17pm
Print Post  
This Topic was moved here from Ideas and Suggestions [move by] SeNS.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.