Sep 9th, 2026 at 7:17am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Usb/Serial/WiFi Debugging › Re: JTAG - Native USB port
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Re: JTAG - Native USB port (Read 2319 times)
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12208
Location: United Kingdom
Joined: Apr 10th, 2010
Re: JTAG - Native USB port
Dec 21st, 2018 at 1:36pm
Print Post  
If you set the programmer in visual micro to "Atmel Studio Device Programming" and set "Always Use Programmer" then we hand over to standard atmel studio device tools for upload.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.