VS Arduino - Raspbery PI 3B+ vs. Serial

Apr 16^th, 2024 at 10:41am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › › › Raspbery PI 3B+ vs. Serial

‹ Previous Topic | Next Topic ›

Pages: 1

Raspbery PI 3B+ vs. Serial (Read 682 times)

visionalex Newbies Offline Posts: 9 Joined: Jul 20^th, 2017	Raspbery PI 3B+ vs. Serial Mar 25^th, 2019 at 10:44pm	Print Post
	Hy Tim, How to set the correct processor speed with an Raspberry Pi B3+. If I compile the code with Serial1.begin(1200); the speed on the Serial line is 19200 If I Change the build.f_cpu nothing happens. How to setup the correct uart speed? Maybee here bcm2835_registers.h?


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Raspbery PI 3B+ vs. Serial Reply #1 - Apr 14^th, 2019 at 3:21pm	Print Post
	Sorry for the delay. When making reports for specific hardware please post installs instructions and also verbose outputs with "show build properties" enabled. Please also state if same issue exists in the arduino ide


	WWW IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›