Apr 25th, 2024 at 1:50pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › no debugger/programmer
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic no debugger/programmer (Read 2186 times)
tompower1963
Newbies
*
Offline


Posts: 4
Joined: Mar 30th, 2019
no debugger/programmer
Mar 30th, 2019 at 5:04pm
Print Post  
hey folks , brand new here to arduino.   When i try to Run to cursor in Debug mode, it pops up the following dialogue and wants me to select a debugger, of which there are 2 choices.

Atmel 7 with visual micro, Arduino ide 1.9 hw is uno
« Last Edit: Mar 31st, 2019 at 10:46am by Tim@Visual Micro »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12076
Location: United Kingdom
Joined: Apr 10th, 2010
Re: no debugger/programmer
Reply #1 - Mar 30th, 2019 at 6:18pm
Print Post  
Hi,

If you want to use the simple usb debugging you did not need to make any changes

If these are on them switch them off.

Switch off "vMicro>Debugger>Use Atmel Studio"
Switch off "vMicro>Uploader>Use Programmer"

If you have a hardware programmer and expect to use atmel studio hardware debugging then please say but with Uno I suspect not.

  
Back to top
WWW  
IP Logged
 
tompower1963
Newbies
*
Offline


Posts: 4
Joined: Mar 30th, 2019
Re: no debugger/programmer
Reply #2 - Mar 31st, 2019 at 3:58am
Print Post  
ok those selections were updated however still no change.  here are the screen shots to show. same message, it keeps going to the programmer /debug property sheet telling me to choose.
« Last Edit: Mar 31st, 2019 at 10:46am by Tim@Visual Micro »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12076
Location: United Kingdom
Joined: Apr 10th, 2010
Re: no debugger/programmer
Reply #3 - Mar 31st, 2019 at 10:46am
Print Post  
please show screen shot of the vMicro>Uploader menu
  
Back to top
WWW  
IP Logged
 
tompower1963
Newbies
*
Offline


Posts: 4
Joined: Mar 30th, 2019
Re: no debugger/programmer
Reply #4 - Apr 1st, 2019 at 1:34pm
Print Post  
Tim that is wierd on my previous post thought i had added the screenshots . for some reason didn't upload. however I did discover that I trying to "run to cursor" and it needed the programmer now I set a breakpoint it indicates it has stopped there.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12076
Location: United Kingdom
Joined: Apr 10th, 2010
Re: no debugger/programmer
Reply #5 - Apr 1st, 2019 at 1:38pm
Print Post  
I removed the images because after I had seen them they were not needed and made the post difficult to follow.

I am unclear if you are using atmel debug or serial debug, if atmel which programmer to you are using but if you are happy then great.
  
Back to top
WWW  
IP Logged
 
tompower1963
Newbies
*
Offline


Posts: 4
Joined: Mar 30th, 2019
Re: no debugger/programmer
Reply #6 - Apr 4th, 2019 at 11:51am
Print Post  
got it working after those adjustments, not sure what i'm doing but its now stepping.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.