VS Arduino - Board dependant on configuration?

Nov 4^th, 2025 at 12:06am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

‹ Previous Topic | Next Topic ›

Pages: 1

Board dependant on configuration? (Read 2965 times)

MartinAndersen Newbies Offline Posts: 5 Joined: May 14^th, 2019	Board dependant on configuration? May 14^th, 2019 at 11:13am	Print Post
	Hi! Im using several boards for the same project and code. One is the "extended" version, other si the "basic", and last the "debug" version. The code has conditional compilation for each board, and ive set some defines that are configuration dependant. So choosing one or the other will build the code accordingly. Everything is great! Just can figure out how to make the board to also be configuration dependant. If i change to a different build config, the board does not change accordingly. Is it possible to accomplish this? It would be great not to manually change the board each time. Thanks!


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12201 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Board dependant on configuration? Reply #1 - May 14^th, 2019 at 11:38am	Print Post
	Yes this is currently under review. There will be an option to fix a board or port to a configuration. It might make more sense in some cases to fix the port but either should be available. We can often work out the board from the port, if not automatically then especially after an upload but maybe not relevant from you.


	WWW Facebook Twitter YouTube IP Logged

MartinAndersen Newbies Offline Posts: 5 Joined: May 14^th, 2019	Re: Board dependant on configuration? Reply #2 - May 14^th, 2019 at 11:41am	Print Post
	That will be great! Is there any ETA for this?


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12201 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Board dependant on configuration? Reply #3 - May 14^th, 2019 at 11:46am	Print Post
	Maybe next week or two. Register for pre-release notifications here https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES


	WWW Facebook Twitter YouTube IP Logged

Tim@Visual Micro Administrator Offline Posts: 12201 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Board dependant on configuration? Reply #4 - May 27^th, 2019 at 6:21pm	Print Post
	This is implemented in the latest 1905.25.5 release in this gallery You have to switch on "vMicro>General>Save Board and Port For Project Configuration". Also applies to board options.


	WWW Facebook Twitter YouTube IP Logged

MartinAndersen Newbies Offline Posts: 5 Joined: May 14^th, 2019	Re: Board dependant on configuration? Reply #5 - May 28^th, 2019 at 9:07am	Print Post
	You just won my annual subscription PS: maybe an option to save board, and a different option to save port. Cause i want to save board but not port... port may be different each time, depending on which USB i connect the board... just a thought.
	« Last Edit: May 28^th, 2019 at 9:09am by MartinAndersen »

	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12201 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Board dependant on configuration? Reply #6 - May 28^th, 2019 at 10:25am	Print Post
	Thanks, I wondered about that. Yes will try to split for next release.


	WWW Facebook Twitter YouTube IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›