Sep 15th, 2026 at 5:03pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › BMP Debugger with all arm chips
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic BMP Debugger with all arm chips (Read 2057 times)
Natsuki-chan
Junior Member
**
Offline


Posts: 25
Joined: Jan 18th, 2017
BMP Debugger with all arm chips
Aug 14th, 2019 at 1:25pm
Print Post  
After using the black magic probe debugging in visual micro itself I cannot turn back again to my own solution. 
I have been using it for STM32F103 boards but I cannot use it for other ARM devices like the Arduino Due.

How can I easily configure it for other boards that do not have the black magic probe option?
« Last Edit: Aug 14th, 2019 at 1:26pm by Natsuki-chan »  
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2962
Joined: Feb 13th, 2019
Re: BMP Debugger with all arm chips
Reply #1 - Aug 15th, 2019 at 2:37pm
Print Post  
There will be a release next week which will contain the pre-configured Black Magic Probe for the SAM Boards such as the DUE.

To custom configure any debugger you can follow this guide, but please pay attention to the notes/warnings...

https://www.visualmicro.com/page/Debugging-Using-Custom-Hardware.aspx
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2962
Joined: Feb 13th, 2019
Re: BMP Debugger with all arm chips
Reply #2 - Aug 18th, 2019 at 10:57pm
Print Post  
The latest update on the below (1908.18) contains the Black Magic pre-configured for debugging the DUE.  It is not setup for upload at present, only for debug.

https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES

Further information can be found on this page:
https://www.visualmicro.com/page/SAM-Debugging.aspx
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.