May 25th, 2025 at 4:57am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › AVRISP MkII - How to get it working with Visual Micro
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic AVRISP MkII - How to get it working with Visual Micro (Read 734 times)
Limonjames
Newbies
*
Offline


Posts: 2
Joined: Feb 29th, 2020
AVRISP MkII - How to get it working with Visual Micro
Feb 29th, 2020 at 10:22am
Print Post  
Hello everyone,,
I'm trying to upload an Arduino sketch to my breadboard using an AVRISP MkII but the IDE insists on having an assigned COM port which it's not as it's using the Jungo driver.
Can this work somehow?
showbox.bio/ tutuapp.uno/ https://vidmate.vet/ 
Much appreciated for any help.
« Last Edit: Mar 2nd, 2020 at 5:03am by Limonjames »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: AVRISP MkII - How to get it working with Visual Micro
Reply #1 - Feb 29th, 2020 at 2:04pm
Print Post  
This means you have installed atmel studio which destroys the normal arduino usb driver for mkII and installs jungo. Arduino uses avrdude to upload via programmer and it doesn't like jungo.Atmel and Arduino went their seperate ways with that.

You have not said which ide you are using but I will assume atmel studio.

You have two choices. Eithe restore the usb driver to the one Arduino likes or set the programmer  in the vMicro>Uploader to "Atmel Device Programming". The later will then use whatever programmer you set for your atmel project in the std. atmel project properties. That will like jungo.

or

There is an article here that might help fix the usb driver for arduino https://www.visualmicro.com/post/2014/01/17/AvrIsp-MkII-Usb-Driver-for-Arduino.a...



  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.