VS Arduino - 20.06.30.3 VS2017/2019/AS7

Dec 8^th, 2025 at 8:35pm (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Enabled vMicro > Compiler > Show Build Properties
Re-Compile your program with these settings enabled

Save the new Output to a Text File and....

Click the Reply button and attach as .txt file OR
Click here to Email us with the file attached, and a link to your post

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › New Releases, Previous Releases and Release Notifications › 20.06.30.3 VS2017/2019/AS7

‹ Previous Topic | Next Topic ›

Pages: 1

Send Topic

20.06.30.3 VS2017/2019/AS7 (Read 683 times)

Simon@Visual Micro Administrator Offline Posts: 2823 Joined: Feb 13^th, 2019	20.06.30.3 VS2017/2019/AS7 Jul 3^rd, 2020 at 4:29pm	Print Post
	Installer Note: If the install for Visual Studio fails, right click and "Open With>Visual Studio Version Selector" Download Visual Micro 20.06.30.3 for VS2017/2019 Download Visual Micro 20.06.30.3 for Atmel Studio 7 Download Visual Micro 20.06.30.3 for Atmel Studio 7 (v2Installer) Upload Verification: Fix to ensure if Upload > Verify is disabled, that "upload.verify=" to avoid errors Change: Sketchbook/libraries have priority over architecure/libraries Download Visual Micro 20.06.30.1 for VS2017/2019 Build Paths: Improvement to use shorter 8dot3 filenames as part of build process (reduces path length issues with multiple libraries) ESP8266 UDP Debug: Fix ensuring connections handled correctly for this variant Download Visual Micro 20.06.30.0 for VS2017/2019 Download Visual Micro CLI 20.06.18.4 Download Visual Micro 20.06.18.0 for Atmel Studio 7 Download Visual Micro 20.06.18.0 for Atmel Studio 7 (v2Installer) GDB: Fix for DUE Native USB Uploads via Atmel ICE and JLink to set correct GPNVM Bits after Erase Reported Here Intellisense: Improvement when adding Libraries to Project GDB: Seperation of Start Debugging and Attach to Process commands for all OpenOCD Debuggers, ensuring Start Debugging resets board, and Attach To Process does not. (Affects: AtmelICE, JLink, STLink, FT2232H, FT2232MM, Olimex USB + Tiny, ESP32 PROG/DEVKIT) GDB: Teensy 3/4 GDB Stub Integration CLI new property to override build path -builder.build_temp_path= GDB and error reporting line number were 1 line wrong. Applied to the project_name.ino only. The NoIDE option was missing all hardware debuggers.
	« Last Edit: Jul 6^th, 2020 at 1:23pm by Simon@Visual Micro »

	WWW Facebook Twitter YouTube IP Logged

Pages: 1

Send Topic

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Cookie Consent