VS Arduino - Creating binary for Arduino Zero w/ Bootloader

Mar 17^th, 2026 at 10:11am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › Installation & Troubleshooting › Creating binary for Arduino Zero w/ Bootloader

‹ Previous Topic | Next Topic ›

Pages: 1

Creating binary for Arduino Zero w/ Bootloader (Read 2729 times)

jasonekly214 Newbies Offline Posts: 1 Joined: Aug 18^th, 2021	Creating binary for Arduino Zero w/ Bootloader Oct 1^st, 2021 at 10:07pm	Print Post
	In the Arduino IDE the "export compiled binary" button will create a .bin for the sketch, and a .bin for the sktech with the bootloader. However VisualMicro seems to only create the sketch .bin. Is there a setting, or what flag can I change, to get it to create the .bin with the bootloader? I need to pass the binary to a coworker to load onto his processor.


	IP Logged

Simon@Visual Micro Administrator Offline Posts: 2867 Joined: Feb 13^th, 2019	Re: Creating binary for Arduino Zero w/ Bootloader Reply #1 - Oct 5^th, 2021 at 1:25pm	Print Post
	Thanks for the report. We are currently investigating this issue, and we will update when there is a fixed release available.


	WWW Facebook Twitter YouTube IP Logged

Simon@Visual Micro Administrator Offline Posts: 2867 Joined: Feb 13^th, 2019	Re: Creating binary for Arduino Zero w/ Bootloader Reply #2 - Oct 21^st, 2021 at 3:57pm	Print Post
	Please try the latest release (21.09.17.5) which should resolve this issue, available at the top of the board below: https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES


	WWW Facebook Twitter YouTube IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›