May 19th, 2025 at 8:57pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Usb/Serial/WiFi Debugging › WiFi debug and OTA Updates not working on MKR WiFi 1010
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic WiFi debug and OTA Updates not working on MKR WiFi 1010 (Read 2322 times)
PavlosA
Newbies
*
Offline


Posts: 9
Joined: Jun 8th, 2022
WiFi debug and OTA Updates not working on MKR WiFi 1010
Sep 3rd, 2022 at 9:35pm
Print Post  
Hi - I'm using Arduino 2 and VS community 2022.  I can't make OTA Updates or WiFi debug work, even with the supplied example in the video (for the MKR WiFi 1010).  I have no problem over USB.

The setup seems simple enough, just changing the Remote Transport to UDP and the local port to the correct IP.  I tried changing the Upload Port/IP to the IP address also.

Is this board supported at this point, with these versions?  Or is OTA still only for the ESP32 boards?

thanks
  
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2704
Joined: Feb 13th, 2019
Re: WiFi debug and OTA Updates not working on MKR WiFi 1010
Reply #1 - Sep 5th, 2022 at 9:35am
Print Post  
Thanks for the report, the Debug:Serial option should be supported by this board for debugging over Wifi.

Can you attach the full build log from your project, with the verbose settings enabled as shown at the top of the page so we can investigate further?
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: WiFi debug and OTA Updates not working on MKR WiFi 1010
Reply #2 - Sep 5th, 2022 at 8:20pm
Print Post  
Thanks for confirming this is an upload issue and not a debug issue.

Can you confirm if OTA upload is working okay in Release mode?

Does OTA upload work in the Arduino IDE?

If the answer is No to both then does the upload work over serial?
« Last Edit: Sep 5th, 2022 at 8:21pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.