Apr 18th, 2024 at 12:21am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › ToolBar Not Working after upgrade to Arduino IDE 2.0
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic ToolBar Not Working after upgrade to Arduino IDE 2.0 (Read 965 times)
CSC
Junior Member
**
Offline


Posts: 38
Location: Panama
Joined: Apr 17th, 2020
ToolBar Not Working after upgrade to Arduino IDE 2.0
Sep 27th, 2022 at 8:06pm
Print Post  
Im running VMicro with VS 2022 Community Edition. I recently upgraded the Arduino IDE to 2.0. I left 1.8 in place. I did some test builds and all worked fine. I removed 1.8 (via control panel) and now the VMicro toolbar no longer works. Specifically:

- ToolBar buttons are greyed out. 
- If I change toolbar visibility to auto the toolbar disappears entirely. If set to manual, it is greyed out.
  
Back to top
 
IP Logged
 
CSC
Junior Member
**
Offline


Posts: 38
Location: Panama
Joined: Apr 17th, 2020
Re: ToolBar Not Working after upgrade to Arduino IDE 2.0
Reply #1 - Sep 27th, 2022 at 9:52pm
Print Post  
SOLVED.

Discovered this behavior was only happening with one Solution. Other Solutions worked ok. 

Project>Rescan Solution fixed it.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.