Jul 14th, 2025 at 3:51am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Ideas, Suggestions and Related Tools › Possible bugs for the new version of stm32 core
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Possible bugs for the new version of stm32 core (Read 1549 times)
songxiao
Junior Member
**
Offline


Posts: 11
Joined: Nov 27th, 2023
Possible bugs for the new version of stm32 core
Nov 27th, 2023 at 2:55pm
Print Post  
Version 2021.1103.2200 After upgrading stm32 CORE to 2.7, using boards defined by this package, such as STM32F103CB, visual micro will get stuck and will not recover.
  
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2728
Joined: Feb 13th, 2019
Re: Possible bugs for the new version of stm32 core
Reply #1 - Nov 29th, 2023 at 4:26pm
Print Post  
Thanks for the report.

Can you attach the full build output with the settings shown at the top of the page?
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
songxiao
Junior Member
**
Offline


Posts: 11
Joined: Nov 27th, 2023
Re: Possible bugs for the new version of stm32 core
Reply #2 - Dec 8th, 2023 at 3:28am
Print Post  
No, because after I switched to STM32, Visual studio was completely stuck, so that when I opened Visual studio and Visual micro projects again, they would be stuck as before.
This package was used, version 2.7.0
https://github.com/stm32duino/Arduino_Core_STM32
  
Back to top
 
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2728
Joined: Feb 13th, 2019
Re: Possible bugs for the new version of stm32 core
Reply #3 - Dec 8th, 2023 at 12:13pm
Print Post  
Thanks for the update and detail.

We have identified the issue and will update with a fixed release in the next 24h.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Simon@Visual Micro
Administrator
*****
Offline


Posts: 2728
Joined: Feb 13th, 2019
Re: Possible bugs for the new version of stm32 core
Reply #4 - Dec 8th, 2023 at 5:16pm
Print Post  
Please try the latest release (23.1103.02) which is available from the top of the below board, this should resolve the issue:
https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
songxiao
Junior Member
**
Offline


Posts: 11
Joined: Nov 27th, 2023
Re: Possible bugs for the new version of stm32 core
Reply #5 - Dec 9th, 2023 at 1:42pm
Print Post  
Thank you very much. I have tried this version and confirmed that it can reliably support the latest version 2.7.1 of STM32 Core without causing any further lag
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.