VS Arduino - WROVER-KIT hardware debug fail

Jul 9^th, 2025 at 8:10pm (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › Usb/Serial/WiFi Debugging › WROVER-KIT hardware debug fail

‹ Previous Topic | Next Topic ›

Pages: 1

WROVER-KIT hardware debug fail (Read 622 times)

Duggle Junior Member Offline Posts: 12 Joined: Jul 5^th, 2021	WROVER-KIT hardware debug fail Jun 16^th, 2024 at 7:00am	Print Post
	I'm in VS2022 trying to get ESP-WROVER-KIT hardware debugging going with a simple demo. It compiles and flashes fine and then this on the output window: 1>------ Skipped Deploy: Project: test, Configuration: Debug ARM ------ 1>Project not selected to build for this solution configuration ========== Deploy: 0 succeeded, 0 failed, 1 skipped ========== ========== Deploy completed at 4:45 PM and took 00.340 seconds ========== and an error popup with this; Unable to start debugging. GDB exited unexpectedly with exit code 1 (0x1). here is the setup: https://drive.google.com/file/d/1WcZsRRk7Fm7FhmHoe33iuurfo19_Gwyp/viewusp=sharin... thanks for any help.
	« Last Edit: Jun 16^th, 2024 at 7:01am by Duggle »

	IP Logged

Simon@Visual Micro Administrator Offline Posts: 2728 Joined: Feb 13^th, 2019	Re: WROVER-KIT hardware debug fail Reply #1 - Jun 17^th, 2024 at 9:05am	Print Post
	Thanks for the report. Can you try the latest release (24.0607.02) from the top of the below board: https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES If you still have issues, can you attach the complete output as a text file from the Output > Micro Build window, after completing a build, and attempting to start the debugging session, so we can review the full environment setup? Also if there is any further output in the Output > Debug window please also attach this.
	« Last Edit: Jun 18^th, 2024 at 9:08am by Simon@Visual Micro »

	WWW Facebook Twitter YouTube IP Logged

jamesangels Newbies Offline Posts: 1 Joined: Oct 11^th, 2024	Re: WROVER-KIT hardware debug fail Reply #2 - Oct 11^th, 2024 at 6:36am	Print Post
	Quote: Thanks for the report. Can you try the latest release (24.0607.02) from the top of the below board: https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES geometry dash lite If you still have issues, can you attach the complete output as a text file from the Output > Micro Build window, after completing a build, and attempting to start the debugging session, so we can review the full environment setup? Also if there is any further output in the Output > Debug window please also attach this. Thanks for your answer. This is what I am looking for.
	« Last Edit: Oct 17^th, 2024 at 3:44am by jamesangels »

	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›