Oct 19th, 2026 at 6:37pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Breakpoint action messages do not appear in Micro Debug Message
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Breakpoint action messages do not appear in Micro Debug Message (Read 75 times)
Steven Bennett
Junior Member
**
Offline


Posts: 41
Location: High Bentham
Joined: Nov 2nd, 2022
Breakpoint action messages do not appear in Micro Debug Message
Oct 8th, 2026 at 4:57pm
Print Post  
Breakpoint action messages do not appear in Micro Debug Message, but do show in Micro Debug Trace - is this correct?

e.g.

17:44:11.869 [up:13s:585ms perf:100ms]   MyFirstProject.ino, line 16      loop()
   LED now ON
MyFirstProject is paused at MyFirstProject.ino, line 16, loop()
MyFirstProject Running
17:45:10.800 [up:01m:12s perf:500ms]   MyFirstProject.ino, line 18      loop()
   LED now OFF
MyFirstProject is paused at MyFirstProject.ino, line 18, loop()
MyFirstProject Running
17:45:13.021 [up:01m:14s perf:100ms]   MyFirstProject.ino, line 16      loop()
   LED now ON
MyFirstProject is paused at MyFirstProject.ino, line 16, loop()
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12250
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Breakpoint action messages do not appear in Micro Debug Message
Reply #1 - Oct 10th, 2026 at 8:15pm
Print Post  
Yes—with the default settings, that is expected for the Serial debugger.

Breakpoint action text goes to Micro Debug Trace by default. Micro Debug Message receives it only when Message is checked under the Serial Monitor’s Message Windows menu.

Enable Message Windows > Message to show action text there too. Both destinations can be enabled together; the Message pane shows the message text without the surrounding trace details.

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.