Jun 17th, 2026 at 9:43am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Sanguino board
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Sanguino board (Read 6785 times)
Hugh Mcgahern
Newbies
*
Offline


Posts: 5
Joined: Dec 19th, 2011
Sanguino board
Dec 19th, 2011 at 1:24pm
Print Post  
Question from a newbie Smiley

How do i register a new board (sanguino) in the board selection box?

It is allready listed in the pins.h file but dosnt appear in the drop down list.

Where does visual micro obtain the board list from?

hugh

  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12205
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Sanguino board
Reply #1 - Dec 19th, 2011 at 2:19pm
Print Post  
Hi, you need to register it for the arduino ide and then it will show up in vs.
You need to read up on how to add boards to the arduino boards.txt. http://sanguino.cc/softwareforwindows
After install, upload a simple sketch using the arduino ide to be sure that you have installed it correctly
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Hugh Mcgahern
Newbies
*
Offline


Posts: 5
Joined: Dec 19th, 2011
Re: Sanguino board
Reply #2 - Dec 19th, 2011 at 2:52pm
Print Post  
I have the sanguino board allready listed (and working) in the arduino ide and visual micro points to that arduino ide exe file.

Although i havnt played with it properly yet i can load a ardiuno pde project in vs and view all the components in solution explorer.

ok i think i'v cracked it, sanguino is appearing in drop down list!


« Last Edit: Dec 19th, 2011 at 4:37pm by Hugh Mcgahern »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12205
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Sanguino board
Reply #3 - Dec 19th, 2011 at 5:10pm
Print Post  
oh. well that's good news Smiley

+ yes vm should know about the arduino.exe install you point it to. it uses the arduino config
« Last Edit: Dec 19th, 2011 at 5:14pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.