VS Arduino - cant setup arduino plugin

Apr 24^th, 2024 at 5:12am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Enabled vMicro > Compiler > Show Build Properties
Re-Compile your program with these settings enabled

Save the new Output to a Text File and....

Click the Reply button and attach as .txt file OR
Click here to Email us with the file attached, and a link to your post

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › › › cant setup arduino plugin

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 8 Replies)

cant setup arduino plugin (Read 8227 times)

Todd Saltzman Newbies Offline Posts: 5 Joined: Apr 14^th, 2013	cant setup arduino plugin Apr 14^th, 2013 at 3:36am	Print Post
	I have visual studio 2012. Installed latest update of arduino plugin. I have arduino 1.04 and the older 1.01(I think that's the latest version this plugin works with. When I open visual studio I go to tool>options>� But there is no visual micro branch and my setting up of the arduino plugin stops. Any ideas what I did wrong.


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: cant setup arduino plugin Reply #1 - Apr 14^th, 2013 at 10:16am	Print Post
	Hi, The express versions of VS do not support plugins You need VS pro for now. In a month or so you should be able to use Atmel Studio. Thanks


	WWW IP Logged

Todd Saltzman Newbies Offline Posts: 5 Joined: Apr 14^th, 2013	Re: cant setup arduino plugin Reply #2 - Apr 14^th, 2013 at 1:53pm	Print Post
	Tim@Visual Micro wrote on Apr 14^th, 2013 at 10:16am: Hi, The express versions of VS do not support plugins You need VS pro for now. In a month or so you should be able to use Atmel Studio. Thanks Its the ultimate version,not express.


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: cant setup arduino plugin Reply #3 - Apr 14^th, 2013 at 2:37pm	Print Post
	Please install .net35


	WWW IP Logged

Todd Saltzman Newbies Offline Posts: 5 Joined: Apr 14^th, 2013	Re: cant setup arduino plugin Reply #4 - Apr 14^th, 2013 at 2:47pm	Print Post
	Tim@Visual Micro wrote on Apr 14^th, 2013 at 2:37pm: Please install .net35 I'm running windows 7 by the way,I don't know if that has any relevance. But anyhow where do I get .net35?


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: cant setup arduino plugin Reply #5 - Apr 14^th, 2013 at 4:11pm	Print Post
	Sorry, I was confused and thought you were on win8. Win7 comes with net35 so ignore my request. The installer is quite simple, just copies a few files, adds some reg keys and registered an api in the windows gac. Please confirm you are attempting to install from the visualmicro.codeplex site? Can you download the msi, right click and "Run as adminstrator"? Thanks


	WWW IP Logged

Todd Saltzman Newbies Offline Posts: 5 Joined: Apr 14^th, 2013	Re: cant setup arduino plugin Reply #6 - Apr 14^th, 2013 at 4:43pm	Print Post
	Tim@Visual Micro wrote on Apr 14^th, 2013 at 4:11pm: Sorry, I was confused and thought you were on win8. Win7 comes with net35 so ignore my request. The installer is quite simple, just copies a few files, adds some reg keys and registered an api in the windows gac. Please confirm you are attempting to install from the visualmicro.codeplex site? Can you download the msi, right click and "Run as adminstrator"? Thanks Yes from the codeplex site. From there the instructions just say to download the update file and install it then I can go into visual studio and start setting it up under the options. The instructions you just mentioned are different than that.so which is right for me?


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: cant setup arduino plugin Reply #7 - Apr 14^th, 2013 at 5:07pm	Print Post
	My instructions are extended for you because you have an install problem. Normally you just install using the big download button on codeplex and then, as you say, go to "Tools>Options>Visual Micro" and set the location of your Arduino.exe. When you click the download button on codeplex you will have the option to "run" or "save". Normally users will click "run" and the installer will complete correctly. However you have said that the installer stops halfway through the install. Therefore I am suggesting that you click "save" and download the .msi installer to your local pc. Then you will be able to right click the installer (using windows explorer) and "Run as administrator". Please do this and report if the installer ran through correctly, if the installer raises an error or a message please let me know what it is. After the installer runs you can open Visual Studio and check to see if the Visual Micro addin is installed. "Tools>Addin Manager" should show the "Visual Micro" addin and should have a tick in the first two boxes?
	« Last Edit: Apr 14^th, 2013 at 6:37pm by Tim@Visual Micro »

	WWW IP Logged

Todd Saltzman Newbies Offline Posts: 5 Joined: Apr 14^th, 2013	Re: cant setup arduino plugin Reply #8 - Apr 14^th, 2013 at 6:33pm	Print Post
	ok I got it figured out. Thanks.


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12076 Location: United Kingdom Joined: Apr 10^th, 2010	Re: cant setup arduino plugin Reply #9 - Apr 14^th, 2013 at 6:35pm	Print Post
	Great. Out of interest what was wrong? Can I explain something better in the install docs? Thanks


	WWW IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.