May 22nd, 2025 at 11:33pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Microchip Studio (Atmel Studio 7) › cannot load an arduino project
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic cannot load an arduino project (Read 5284 times)
rcbandwidth
Newbies
*
Offline


Posts: 4
Joined: Jan 13th, 2013
cannot load an arduino project
Feb 19th, 2014 at 4:46pm
Print Post  
Hi:  I just downloaded new Atmel Studio along with New Visual Micro

I put in the path to my Arduino.exe, I do not see any boards
listed in the dropdown box...getting frustrated.

Regards
Bob
« Last Edit: Feb 19th, 2014 at 4:47pm by rcbandwidth »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: cannot load an arduino project
Reply #1 - Feb 19th, 2014 at 4:50pm
Print Post  
Hi Bob,

Sorry you are having this problem.

Two things to check please..

1)
The location must be the folder path to the arduino.exe, do not include "\arduino.exe" and do not surround with quotes.

2)
Ensure that the location is set for the respective Arduino Ide version. It's currently confusing with, for example, Arduino 1.0.5 and 1.5.5. So please check that your have used the correct Arduino 1.0.x or Arduino 1.5.x

Thanks

EDIT: If it was working previously and you upgraded then run the installer and click remove the run again and click install. Make sure atmel studio is closed while you do this. 

Finally is still now working and the location is configured correctly then click "tools>visual micro>reset user interface"

Thanks
« Last Edit: Feb 19th, 2014 at 4:53pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
rcbandwidth
Newbies
*
Offline


Posts: 4
Joined: Jan 13th, 2013
Re: cannot load an arduino project
Reply #2 - Feb 19th, 2014 at 5:45pm
Print Post  
Thank you mod...I can see the boards.

Thanks for the quick response also

Bob Cheesy
  
Back to top
 
IP Logged
 
rcbandwidth
Newbies
*
Offline


Posts: 4
Joined: Jan 13th, 2013
Re: cannot load an arduino project
Reply #3 - Feb 19th, 2014 at 6:01pm
Print Post  
Hi Moderator:

I was able to load an INO file,but I get this message

Compiling 'TestBobsSketches' for 'Arduino Uno'
Binary sketch size: 2454 bytes (used 8% of a 32256 byte maximum) (0.27 secs)
Minimum Memory Usage: 213 bytes (10% of a 2048 byte maximum)
'Upload Using' requires a programmer. Upload cancelled.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12188
Location: United Kingdom
Joined: Apr 10th, 2010
Re: cannot load an arduino project
Reply #4 - Feb 19th, 2014 at 6:30pm
Print Post  
Hi Bob,

I think you ticked "Tools>Visual Micro>Upload Using Programmer" by mistake. Please untick for normal Arduino upload using a Usb/COM port.

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
rcbandwidth
Newbies
*
Offline


Posts: 4
Joined: Jan 13th, 2013
Re: cannot load an arduino project
Reply #5 - Feb 19th, 2014 at 6:52pm
Print Post  
Yes I did.....Thanks again

  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.