Jul 9th, 2025 at 9:57pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › How to change Visual Micro settings from using Arduino 1.0 to 1.6
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic How to change Visual Micro settings from using Arduino 1.0 to 1.6 (Read 2878 times)
Dflyer
Newbies
*
Offline


Posts: 2
Location: Massachusetts
Joined: May 10th, 2014
How to change Visual Micro settings from using Arduino 1.0 to 1.6
Apr 11th, 2015 at 6:49pm
Print Post  
I removed all instances of Atmel Studio and installed the latest version. I removed my previous version of Visual Micro and installed your latest version. And I removed Arduino 1.6.3 and installed 1.6.1.

There are actually 2 problems. First I still see Arduino 1.0.x in the Micro Apps drop down list box and the Micro Boards drop down list box is blank. I do see the correct COM port  in the Serial Ports drop down list box.
« Last Edit: Apr 13th, 2015 at 2:12am by Tim@Visual Micro »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12191
Location: United Kingdom
Joined: Apr 10th, 2010
Re: How to change Visual Micro settings from using Arduino 1.0 to 1.6
Reply #1 - Apr 11th, 2015 at 7:33pm
Print Post  
Reminder: Arduino 1.6.2 + version are not yet supported. Download link to Arduino 1.6.1 via our home page

Hi Dflyer,

This is slightly different. 

You have upgraded from 1 .0.x version to 1.6.1. This means that in Visual Micro you have to drop down the list of apps which in your case shows Arduino 1.0.x and remove the install path. Then select the Arduino 1.6 application name from the list and set the install path. Then click OK.

Visual Micro supports more than one version of Arduino (other other ide's) installed at the same time. This is why you set the installation location of each type of Ide.

For more info please see the documentation http://www.visualmicro.com/page/User-Guide.aspx?doc=First-steps.html

Let me know if I have missed the point.

Thanks 

slightly older example with 1.0 and 1.5, tip: use zips to install the arduino ide unless you need to update usb drivers.



« Last Edit: Apr 13th, 2015 at 2:12am by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Dflyer
Newbies
*
Offline


Posts: 2
Location: Massachusetts
Joined: May 10th, 2014
Re: How to change Visual Micro settings from using Arduino 1.0 to 1.6
Reply #2 - Apr 12th, 2015 at 12:47pm
Print Post  
I see  Huh
Yes, your suggestion works for me.

Thank you
« Last Edit: Apr 13th, 2015 at 2:11am by Tim@Visual Micro »  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.