Apr 20th, 2024 at 10:54am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Visual Studio 2017, 2019, 2022 › DUE digital pin DEBUG reporting not working
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic DUE digital pin DEBUG reporting not working (Read 2304 times)
omf
Newbies
*
Offline


Posts: 4
Joined: Dec 31st, 2012
DUE digital pin DEBUG reporting not working
Aug 15th, 2015 at 10:59pm
Print Post  
I have been messing about with the debugger again to get to grips with the new layout and am able to get it working reporting live digital pins from the Uno and Mega, but when i change the board to the DUE it causes me grate problems and it refuses to work.

Because the Uno and Mega work i don't think its an installation or set up issue so i think there is a problem with the debugger. possibly due to the different board architecture?

Sometimes I get all 55 pin boxes to display other times no, but when it does using the blink sketch pin 13 does not alternate red and green when the same sketch on the Uno and Mega does alternate like it should do.

Anyone else had trouble with the DUE?
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.