Jun 2nd, 2025 at 3:50pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Moving to windows 10
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Locked Topic Moving to windows 10 (Read 2862 times)
starstuff
Newbies
*
Offline


Posts: 5
Joined: May 29th, 2015
Moving to windows 10
Aug 17th, 2015 at 10:27pm
 
After reading this post http://www.visualmicro.com/forums/YaBB.pl?num=1438775597 I'm having second thoughts on how to move my VM license to windows 10 so I hope the VM guys can give some advice.

Right now I have VM and VS2013 in my windows 7 pro computer. I already upgraded to windows 10 pro using a separate hard drive (clean install) so I have two hard drives one with W7 and VS2013 and one with W10 and VS2015.

First question: Is VM stable enough to be used in W10 and VS2015 or I should wait a little more before I move my license to W10?

2. What happens if I have my old W7 and VS2013 active and activate or try to activate VM in W10 and VS2015. I suppose there is a violation of the TOS (that I don't want or care to read). Will that create a conflict? Is it OK? Will the DMCA cops raid my office?

3. How do I remove/deactivate my VM license from my old W7 computer and how do I activate it in my new W10?

Thanks
rob
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12191
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Moving to windows 10
Reply #1 - Aug 17th, 2015 at 11:31pm
 
Hi,

Thanks for the questions.

The Vs 2015 extension is the recommended solution. It's out of beta and i well tested. Keep an eye out for updates which vs will notify you about. There has been a lot happening in the Arduino world as usual so there are plenty of updates.

For the key reset please email your key to info [at] visualmicro.com and request a reset for win10. It will leave your older licence running so both can be used.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
starstuff
Newbies
*
Offline


Posts: 5
Joined: May 29th, 2015
Re: Moving to windows 10
Reply #2 - Aug 18th, 2015 at 2:11am
 
Tim,

Information sent...

Thank you very much.
rob
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.