VS Arduino - Unable to download to xmega

Sep 24^th, 2026 at 5:07pm (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › › › Unable to download to xmega

‹ Previous Topic | Next Topic ›

Pages: 1

Unable to download to xmega (Read 3339 times)

Robert Norton Newbies Offline Posts: 2 Joined: Sep 19^th, 2015	Unable to download to xmega Sep 19^th, 2015 at 3:29pm	Print Post
	Gentlemen, I am using a variant of xmegaduino for a board I developed. Visual Micro works fine!... except I cannot upload to the board. xmega uses a serial port when connected (firmware running) and uses DFU (Device Firmware Update) to upload code. Unfortunately, it seems Visual Micro checks for COMx before uploading. Because this check fails, it does not upload. What may I do?


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12233 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Unable to download to xmega Reply #1 - Sep 20^th, 2015 at 3:46pm	Print Post
	Hi, I have just removed a check on the port from the next release of Visual Micro. It was a historic check that the arduino ide also used to make but it appears the option has been removed from the arduino ide. I think that will resolve the issue but it would be helpful to have your boards.txt and platform.txt (or entire core for testing). The new release will be available during the next day or two Thanks


	WWW Facebook Twitter YouTube IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›