VS Arduino - Uploading To Due Native Port

May 9^th, 2025 at 1:50am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Enabled vMicro > Compiler > Show Build Properties
Re-Compile your program with these settings enabled

Save the new Output to a Text File and....

Click the Reply button and attach as .txt file OR
Click here to Email us with the file attached, and a link to your post

Support requests without the output above may be impossible to answer, so please help us to help you

VS Arduino › Visual Micro › Visual Studio 2017, 2019, 2022 › Uploading To Due Native Port

‹ Previous Topic | Next Topic ›

Pages: 1

Send Topic

Uploading To Due Native Port (Read 3475 times)

RayLivingston Full Member Offline Posts: 158 Location: California Joined: Nov 24^th, 2012	Uploading To Due Native Port Feb 16^th, 2016 at 3:41am	Print Post
	I've never been able to get uploads using the Due Native port to work. When I tried again today, I got the below truly perplexing output. The selected board was "Arduino Due (Native USB Port)", which showed up in Device Manage as COM5. The board that is assigned to COM11 wasn't even plugged into the PC at the time. Quote: Compiling 'SuperATC' for 'Arduino Due (Native USB Port)' Build folder: x Binary sketch size: 244,284 bytes (used 47% of a 524,288 byte maximum) (1.73 secs) Uploading to I/O board using 'COM11' Unable to auto-reset: COM11. Check that you have the correct port selected. If it is correct, try pressing the board's reset button after initiating the upload. PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} PORTS {} / {} => {} Couldn't find Leonardo on the selected port. Check that you have the correct port selected. If it is correct, try pressing the board's reset button after initiating the upload. What's the trick? Regards, Ray L.


	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12187 Location: United Kingdom Joined: Apr 10^th, 2010	Re: Uploading To Due Native Port Reply #1 - Feb 16^th, 2016 at 6:31pm	Print Post
	You don't say what port is selected in visual micro tool bar or visual micro menu? Can you see any ports? What happens when you click reset on the board when you see PORTS {} / {} What happens if you enter COM5 into "project properties>upload port"


	WWW Facebook Twitter YouTube IP Logged

RayLivingston Full Member Offline Posts: 158 Location: California Joined: Nov 24^th, 2012	Re: Uploading To Due Native Port Reply #2 - Feb 16^th, 2016 at 7:08pm	Print Post
	Tim@Visual Micro wrote on Feb 16^th, 2016 at 6:31pm: You don't say what port is selected in visual micro tool bar or visual micro menu? Can you see any ports? What happens when you click reset on the board when you see PORTS {} / {} What happens if you enter COM5 into "project properties>upload port" Tim, 1. The only port that shows up in VisualMicro is COM11, even though it's not physically there, but COM5 is. 2. Have not tried clicking reset (it's hard to get to on my board....). I will try it tonight. 3. I will try entering a port tonight. Didn't know you could even do that.... Regards, Ray L.


	IP Logged

Pages: 1

Send Topic

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Cookie Consent