Mar 15th, 2026 at 12:54am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Other Hardware › STM STLink Programmer for STM chips
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic STM STLink Programmer for STM chips (Read 7172 times)
Doctor Wizard
Junior Member
**
Offline


Posts: 21
Location: Orange Park, FL
Joined: Dec 2nd, 2014
STM STLink Programmer for STM chips
Jul 21st, 2016 at 10:57pm
Print Post  
How do I get VisualMicro to recognize the STM STLink programmer for use with STM32 based boards? https://www.adafruit.com/products/2548  If you're not familiar with it, it's just a little USB dongle with 10 output/control pins on the other end.  It looks almost exactly like the Atmel USB ISP programmer.  Under device manager, it does not show up as a serial port, it appears under 'Universal Serial Bus Devices'.  The Arduino IDE recognizes it and can upload to it, but not VM.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12204
Location: United Kingdom
Joined: Apr 10th, 2010
Re: STM STLink Programmer for STM chips
Reply #1 - Jul 21st, 2016 at 11:06pm
Print Post  
Hi,

Unless my info is out of date then in the Arduino IDE you have changed "Upload Method" from Serial to STLink?

If so then are you saying that you dont have a vMicro>Option = Upload Method to change from Serial to STLink?

If not the case then please give a screen shot of the vMicro menu and also the menu in the Arduino IDE where you have selected ST Link

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Doctor Wizard
Junior Member
**
Offline


Posts: 21
Location: Orange Park, FL
Joined: Dec 2nd, 2014
Re: STM STLink Programmer for STM chips
Reply #2 - Jul 21st, 2016 at 11:19pm
Print Post  
Yup!  Shure do!  Overlooked it cuz not used to that being there on the menu since I usually work with Atmel.  Thanks!
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12204
Location: United Kingdom
Joined: Apr 10th, 2010
Re: STM STLink Programmer for STM chips
Reply #3 - Jul 21st, 2016 at 11:23pm
Print Post  
Great thanks for the update
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.