Apr 8th, 2026 at 12:21pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Visual Studio 2019, 2022, 2026 › Fails to download ProTrinket using USB method
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Fails to download ProTrinket using USB method (Read 3150 times)
Richard Arndt
Junior Member
**
Offline


Posts: 25
Joined: May 3rd, 2014
Fails to download ProTrinket using USB method
Jul 7th, 2017 at 3:08pm
Print Post  
Visual Studio 2017
Visual Micro (current version)
Adafruit Pro Trinket 5V 16MHz

Visual Micro fails to download ProTrinket following Adafruit's instructions:
https://learn.adafruit.com/introducing-pro-trinket/starting-the-bootloader

However, programming works with Arduino IDE using either USB or FTDI methods.

See attached VMDownloadLog.txt

  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12204
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Fails to download ProTrinket using USB method
Reply #1 - Jul 8th, 2017 at 4:16pm
Print Post  
For the USB method you need to select the programmer and enable the "always use for uploads" property next to the programmer selection.

There is a "micro programmer" toolbar for one click operation otherwise you can use the vMicro>Uploader menu,

Can you post the output for FTDI to show why that failed?

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Richard Arndt
Junior Member
**
Offline


Posts: 25
Joined: May 3rd, 2014
Re: Fails to download ProTrinket using USB method
Reply #2 - Jul 11th, 2017 at 5:54pm
Print Post  
As noted in the title of post, the FTDI method works.

Yes, as recommended, setting "Always use programmer for uploads" worked for USB method.

Thank you.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12204
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Fails to download ProTrinket using USB method
Reply #3 - Jul 11th, 2017 at 8:21pm
Print Post  
Hi,

Sorry it wasn't clear, 

All boards have a usb port that is a standard upload port which might use ftdi or a.n.o upload method. So the syntax here is unique to adafruit and the trinket board.

This also suggested (at quick glance) that vm was failing for both Smiley

Quote:
However, programming works with Arduino IDE using either USB or FTDI methods.


I have purchased one, it arrived today and will try it over the next few days.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.