May 2nd, 2025 at 8:04pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Other Hardware › ESP8266 Exception Decoding
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 8 Replies) ESP8266 Exception Decoding (Read 19724 times)
David Albert
Newbies
*
Offline


Posts: 1
Joined: Dec 12th, 2017
ESP8266 Exception Decoding
Dec 12th, 2017 at 10:21pm
Print Post  
Anyone who does much work with the ESP8266 encounters exceptions and the accompanying register and stack dump.  In the Arduino IDE, you can use EpsExceptionDecoder (https://github.com/me-no-dev/EspExceptionDecoder) to decode the exception.  This is incredibly useful; is there a way to do this in vMicro?

Unfortunately, the xtensa tools directory that gets installed automatically with the arduino board selection doesn't appear to include some common gcc tools like objdump that would allow you to examine the .elf file and decode exceptions manually.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12186
Location: United Kingdom
Joined: Apr 10th, 2010
Re: ESP8266 Exception Decoding
Reply #1 - Dec 13th, 2017 at 1:11pm
Print Post  
I'll add it to the list.

You might be able to make use of this already using the visual studio "tools>external tools" system although you might need help with paths.

However I would expect that you can run as an external tools the java.exe from the arduino path along with the name of the .jar file

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: ESP8266 Exception Decoding
Reply #2 - Mar 2nd, 2018 at 9:32am
Print Post  
Tim@Visual Micro wrote on Dec 13th, 2017 at 1:11pm:
I'll add it to the list.

You might be able to make use of this already using the visual studio "tools>external tools" system although you might need help with paths.

However I would expect that you can run as an external tools the java.exe from the arduino path along with the name of the .jar file



It does not work. 
Could you, please, test and report how to include 
Exception Decoder in Vmicro?
« Last Edit: Mar 2nd, 2018 at 9:32am by Kabron »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12186
Location: United Kingdom
Joined: Apr 10th, 2010
Re: ESP8266 Exception Decoding
Reply #3 - Mar 5th, 2018 at 1:38pm
Print Post  
Actually there is a different version on github that runs as an external command line tool. That one would have done the job.

Try the latest visual micro and see if this option works for you.

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: ESP8266 Exception Decoding
Reply #4 - Mar 6th, 2018 at 6:21am
Print Post  
Tim@Visual Micro wrote on Mar 5th, 2018 at 1:38pm:
Actually there is a different version on github that runs as an external command line tool.


That was the first I tried. It cannot find xtensa-esp32-elf-addr2line. I tried all possible path variants with no luck, that is why I ask you for a detail installation procedure.
« Last Edit: Mar 6th, 2018 at 6:24am by Kabron »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12186
Location: United Kingdom
Joined: Apr 10th, 2010
Re: ESP8266 Exception Decoding
Reply #5 - Mar 6th, 2018 at 12:11pm
Print Post  
I see. If you switch on vmicro>compiler> "show build properties" or "verbose" you get to see where the tool chain is installed.

Did you try the new icon on the serial monitor?
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: ESP8266 Exception Decoding
Reply #6 - Mar 6th, 2018 at 2:00pm
Print Post  
Tim@Visual Micro wrote on Mar 6th, 2018 at 12:11pm:
I see. If you switch on vmicro>compiler> "show build properties" or "verbose" you get to see where the tool chain is installed.

Did you try the new icon on the serial monitor?


1. I do know where tool chain located, but with any path configuration(in my case "d:\Arduino\hardware\espressif\ESP32\tools\xtensa-esp32-elf") in the command line parameters Exception Decoder said that it cannot find xtensa-esp32-elf-addr2line in the d:\Arduino\hardware\espressif\ESP32\tools\xtensa-esp32-elf/bin. It automatidcally added /bin to my path.
Any /\ combinations  in the path do not work. 
Code
Select All
D:\Arduino\EspArduinoExceptionDecoder>decoder.py -p ESP32 -t d:\Arduino\hardware\espressif\ESP32\tools\xtensa-esp32-elf  -e "  
ERROR: addr2line not found -addr2line)
ERROR: Parser not complete!


2.There is no such icon in the serial monitor in my case in the latest vmicro version.
« Last Edit: Mar 6th, 2018 at 2:20pm by Kabron »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12186
Location: United Kingdom
Joined: Apr 10th, 2010
Re: ESP8266 Exception Decoding
Reply #7 - Mar 6th, 2018 at 3:37pm
Print Post  
1)

Does your serial monitor have an exception showing in it? If so please paste it here. If not then you will not see the exception icon.

2)

Please switch on vmicro>compiler> "show build properties" or "verbose"  and post the output as .txt file or email to info[at]visualmicro.com with link to this post

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: ESP8266 Exception Decoding
Reply #8 - Mar 6th, 2018 at 4:10pm
Print Post  
1. I understand. I had no exception in monitor window.
2. mailed
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12186
Location: United Kingdom
Joined: Apr 10th, 2010
Re: ESP8266 Exception Decoding
Reply #9 - Mar 6th, 2018 at 5:01pm
Print Post  
Your build log doesn't show the standard esp8266 tool chain.

I suggest removing the arduino ide\hardware\expressif folder and installing esp8266 via arduino ide board manager.

http://arduino.esp8266.com/stable/package_esp8266com_index.json



  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: ESP8266 Exception Decoding
Reply #10 - Mar 7th, 2018 at 6:03am
Print Post  
Tim@Visual Micro wrote on Mar 6th, 2018 at 5:01pm:
Your build log doesn't show the standard esp8266 tool chain.

ESP8266 is not my goal. As stated on the product page:
Exception Stack Trace Decoder for ESP8266 and ESP32, so I need it for ESP32.
And as you can see, Decoder does understand that the target is ESP32, but could not realize the path.
« Last Edit: Mar 7th, 2018 at 6:06am by Kabron »  
Back to top
 
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: ESP8266 Exception Decoding
Reply #11 - Mar 7th, 2018 at 9:06am
Print Post  
Apropos, I do not see the exception icon when exception occured.
  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12186
Location: United Kingdom
Joined: Apr 10th, 2010
Re: ESP8266 Exception Decoding
Reply #12 - Mar 7th, 2018 at 11:58am
Print Post  
The title of the thread is esp8266 not esp32

The Esp32 page on Visual Micro has a link for an esp32 arduino board package

http://www.visualmicro.com/page/How-to-install-Esp32-for-Arduino-and-Visual-Micr...

If you have any question about exception output then please state which tool chain version you installed.

Thanks
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Kabron
Full Member
***
Offline


Posts: 170
Joined: Nov 1st, 2015
Re: ESP8266 Exception Decoding
Reply #13 - Mar 7th, 2018 at 1:14pm
Print Post  
Sorry, I did not noticed that.
Better, I create a special topic.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.