May 5th, 2025 at 8:15pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › Wrong Network Port (OTA) gets selected, can't select correct COM port
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Wrong Network Port (OTA) gets selected, can't select correct COM port (Read 2376 times)
Manuauto
Newbies
*
Offline


Posts: 2
Joined: May 17th, 2018
Wrong Network Port (OTA) gets selected, can't select correct COM port
May 17th, 2018 at 11:10am
Print Post  
This is a very annoying and frustrating problem which occurred in the latest release.

I can't select COM3 for my Arduino Nano for example, it automatically switches back to an IP-address.

Output: Uploading 'POV_Light_Hall' to 'Arduino Nano w/ ATmega328P' using '192.168.1.247'
The uploader returned an error
Resetting the board
Failed to reset the board, upload failed

I have to select the correct port and then click on Start very quickly, otherwise it won't upload!
I'd greatly appreciate any help! Smiley

This happened first when uploading code to an STM32 with stm32duino bootloader.
« Last Edit: May 17th, 2018 at 11:17am by Manuauto »  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12187
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Wrong Network Port (OTA) gets selected, can't select right COM port
Reply #1 - May 17th, 2018 at 11:14am
Print Post  
Please switch off menu item "vMicro>General>Auto Select Board/Port When A Device Connects"
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Manuauto
Newbies
*
Offline


Posts: 2
Joined: May 17th, 2018
Re: Wrong Network Port (OTA) gets selected, can't select correct COM port
Reply #2 - May 17th, 2018 at 11:20am
Print Post  
Thanks, this solved the issue!  Smiley

Maybe the developers should disable this (new ?) option by default, just to avoid such issues...
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12187
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Wrong Network Port (OTA) gets selected, can't select correct COM port
Reply #3 - May 17th, 2018 at 12:53pm
Print Post  
Yes the release next weekend defaults to OFF

It was a good idea that wan't a good idea.

Thanks for the post.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.