VS Arduino - FreeRTOS

Dec 13^th, 2025 at 11:16am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

‹ Previous Topic | Next Topic ›

Pages: 1

FreeRTOS (Read 4164 times)

ALF321 Junior Member Offline Posts: 10 Joined: Feb 11^th, 2019	FreeRTOS Feb 11^th, 2019 at 9:20pm	Print Post
	I want to add the installed freeRTOS library using the NODE MCU ESP12E. Under the Arduino IDE i can see this lib but under visual micro i don't find it. The Visual Micro Explorer says that the lib has been installed. If i switch to the Arduino Uno board i can see the lib. Why does the Arduino IDE support ESP8266, Node MCU and so on and visual micro does not? Using FreeRTOS 10.1.1-1, Arduino IDE 1.8.3 VISUAL Studio 2017 Version 15.9.6 Community Edition and visual micro IDE Version 10.80.3
	« Last Edit: Feb 11^th, 2019 at 9:50pm by ALF321 »
	Please Register or Login to the Forum to see File Attachments
	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12203 Location: United Kingdom Joined: Apr 10^th, 2010	Re: FreeRTOS Reply #1 - Feb 11^th, 2019 at 11:28pm	Print Post
	Correct me if I am wrong here .... It is confusing to see the lib in the arduino ide because the library is set to be available only to the AVR platform. You can see this in the library.properties of the library in sketchbook/libraries/FreeRTOS If you use the lib in the arduino ide and click Build it fails because the library expects some avr specific code to be available. A use has added an article here with example of freeRTOS for the esp32 https://esp32.com/viewtopic.php?t=5859


	WWW Facebook Twitter YouTube IP Logged

ALF321 Junior Member Offline Posts: 10 Joined: Feb 11^th, 2019	Re: FreeRTOS Reply #2 - Feb 21^st, 2019 at 1:41pm	Print Post
	For ESP32 it works fine. But if i want to use any ESP8266 board especially "Generic ESP 8266" or NodeMCU with ESP-12E the library seems to be not available. Board Package for ESP8266 is V 2.5.0
	« Last Edit: Feb 21^st, 2019 at 1:47pm by ALF321 »

	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12203 Location: United Kingdom Joined: Apr 10^th, 2010	Re: FreeRTOS Reply #3 - Feb 21^st, 2019 at 5:19pm	Print Post
	As explained previously you have to look for an arduino freeRTOS solution and that will also work in Visual Micro. If you believe that library you asked about should work then let me know but from what I could see it fails to build in both the arduino ide and visual micro. The fact the library is not shown on the "add lib" menu in visual micro is because the library is marked as "not for esp8266", it is for "avr" chips however you can add an #include for the lib to your code and visual micro will attempt to use it.


	WWW Facebook Twitter YouTube IP Logged

ALF321 Junior Member Offline Posts: 10 Joined: Feb 11^th, 2019	Re: FreeRTOS Reply #4 - Feb 22^nd, 2019 at 4:45pm	Print Post
	Yes you're right. It fails in both cases (Arduino IDE and visual micro). So i use the esp32 board only
	« Last Edit: Feb 22^nd, 2019 at 4:46pm by ALF321 »

	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12203 Location: United Kingdom Joined: Apr 10^th, 2010	Re: FreeRTOS Reply #5 - May 30^th, 2019 at 10:39pm	Print Post
	Off-Topic replies have been moved to this Topic.


	WWW Facebook Twitter YouTube IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›