May 2nd, 2025 at 10:50pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Other Hardware › How can i install STM32Duino in Visual Micro
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic How can i install STM32Duino in Visual Micro (Read 2954 times)
stnih07
Newbies
*
Offline


Posts: 7
Joined: Dec 20th, 2015
How can i install STM32Duino in Visual Micro
May 11th, 2019 at 9:30pm
Print Post  
Hello,

I'm using Visual Micro with Atmel Studio 6.2 for 8-bit Atmel Avr's.
I am starting STM32 population and i want to use Visual Micro with Atmel Studio 6.2 becuse i like its and very useful.

Therefore, I did the following link operations respectively.
https://github.com/stm32duino/wiki/wiki/Getting-Started

And STM32Duino is working on ArduinoIDE without any problems. 
I checked the files after installation.

Arduino Files in :
C:\Program Files (x86)\Arduino_1.8.9
STM32Duino Files :
C:\Users\STNIH\AppData\Local\Arduino15

Following,
Open Atmel Studio 6.2
Tools >> Visual Micro >> Configure Ide Locations
Select >> C:\Program Files (x86)\Arduino_1.8.9

That is ok but STM32Duino features don't come in like Arduino Ide.

What can I do for it? 

How can I define STM32Duino files to Visual Micro?
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12186
Location: United Kingdom
Joined: Apr 10th, 2010
Re: How can i install STM32Duino in Visual Micro
Reply #1 - May 14th, 2019 at 11:44am
Print Post  
The as6.2 version of visual micro is no longer supported. You can read on our microchip gallery page which was the last arduino version it supported. The download if for existing customers who want to reinstall. AS6.2 is very old!

Why not install AS7?

You might find that the "Arduino_STM" can be installed from zip below mydocuments\arduino\hardware but do not try if you are not expert with arduino. Please use current software to match your current arduino software version.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
stnih07
Newbies
*
Offline


Posts: 7
Joined: Dec 20th, 2015
Re: How can i install STM32Duino in Visual Micro
Reply #2 - May 17th, 2019 at 10:12am
Print Post  
I did a clean installation with Visual Studio 7. It's working.
Thanks.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.