Sep 16th, 2025 at 11:16am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic VMDPR_|0:56:48:16:4:0:43:|||_VMDPR (Read 2922 times)
Bob Jones
Full Member
***
Offline


Posts: 210
Location: Bellingham, WA
Joined: Dec 4th, 2015
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
Jul 2nd, 2019 at 5:03am
Print Post  
Is there any hope of getting rid of this garbage. I know that I can make it go away by compiling in Release mode, but then I can't see the Digital Pins. Here is what my Serial Monitor looks like when I compile in Debug mode:

ENTER COMMAND IN SERIAL MONITOR:
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:17:4:0:43:|||_VMDPR
VMDPR_|0:56:112:21:6:0:43:|||_VMDPR
VMDPR_|0:56:48:21:4:0:43:|||_VMDPR
VMDPR_|0:56:112:21:4:0:43:|||_VMDPR
VMDPR_|0:56:48:17:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
VMDPR_|0:56:48:16:4:0:43:|||_VMDPR

I know I have raised this issue before, but I have to ask again: Any hope?

  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12198
Location: United Kingdom
Joined: Apr 10th, 2010
Re: VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
Reply #1 - Jul 2nd, 2019 at 9:43pm
Print Post  
Is your own code sending serial? If so has it always got \r\n line terminator (println()) 

What does "ENTER COMMAND IN SERIAL MONITOR:" mean?


You can switch off digital report and add this to a breakpoint message

{@ReportDigital}

The benefit of this is the pins are refreshed when you want them to be and you will know when the refresh message is being sent so can ensure your own serial is terminated fully.

Alternatively use an FTDI cable of adapter to hook up a second serial port (or the software serial option) so that the debugger does not use the serial port you use in your code.

Finally, the latest release of visual micro supports hardware debugging for quite a few boards, more to come. Which board are you using?
« Last Edit: Jul 2nd, 2019 at 9:47pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Bob Jones
Full Member
***
Offline


Posts: 210
Location: Bellingham, WA
Joined: Dec 4th, 2015
Re: VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
Reply #2 - Jul 2nd, 2019 at 9:56pm
Print Post  
Tim,

Thanks for getting back to me. The "ENTER COMMAND IN SERIAL MONITOR:" message is my code letting me (the user) know that I can enter commands into the Serial Monitor to control the robot. Commands can also come from a WiFi connection, a Bluetooth connection or even from an internal module called Navigator that generates commands that avoid obstacles.

You state, "Alternatively use an FTDI cable of adapter to hook up a second serial port (or the software serial option) so that the debugger does not use the serial port you use in your code." I am not familiar with FTDI cables, but the idea of hooking up a second monitor for Serial.print and Serial.read has my interest. Any more documentation on how to do this?

Boards: I use MEGAand NANO boards and occasionally UNOs.
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12198
Location: United Kingdom
Joined: Apr 10th, 2010
Re: VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
Reply #3 - Jul 2nd, 2019 at 10:08pm
Print Post  
Doing reads in your own code and many writes or writes without line terminator will be too much for the debugger to share the same serial port. So you are certainly in danger of needing to use a 2nd port.

We would normally expect the debug to be on the 2nd port so that your own serial command is always on the same port regardless of debug or not,

With the mega it is easy because it has more than one Serial port. So you can use the vMicro>Debugger menu to set the Remote port to Serial2 and Local port to the COM port that your FTDI is connected to. For the Uno and nano which only have one hardware Serial port you need to use the F$ project properties to set the Transport to SoftwareSerial and the LocalPort to the FTDI COM port and the Local/Remote speed to 57600 baud.

In both cases you need an FTDI cable or board that plugs into the PC as normal USB but on the other end you have capability to take wires to the respective pins on the circuit board.

You can read more here about debugging Arduino with different ports and pins here

The above page shows the FTDI board, this page shows an FTDI cable. (I searched google for the cable and picked a random so no recommendation about price or purchase. It looked expensive).

You only need two pins from the FTDI, RX,TX. Ignore power and other pins.
« Last Edit: Jul 2nd, 2019 at 10:12pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Bob Jones
Full Member
***
Offline


Posts: 210
Location: Bellingham, WA
Joined: Dec 4th, 2015
Re: VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
Reply #4 - Jul 2nd, 2019 at 10:21pm
Print Post  
SO I think I get it. I get an FTDI cable,plug that into a USB port and hook it to the Serial 2 pins on the Mega. Correct?

The only thing I need to know is what to buy. Is this what you are recommending? https://www.amazon.com/EZSync-serial-TTL-232R-5V-WE-compatible-EZsync009/dp/B010...

If so, it has 6 wires but Serial ports only need two. What are the other four?
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12198
Location: United Kingdom
Joined: Apr 10th, 2010
Re: VMDPR_|0:56:48:16:4:0:43:|||_VMDPR
Reply #5 - Jul 2nd, 2019 at 11:04pm
Print Post  
It's up to you if you buy a board or a cable and if the cable is male or female.

As I said the other pins can be ignored but they are explained in the picture I posted and on the web.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.