VS Arduino - VS2017 ESP32 Wrover No Hardware Debug Option

Sep 10^th, 2026 at 11:36pm (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

‹ Previous Topic | Next Topic ›

Pages: 1

VS2017 ESP32 Wrover No Hardware Debug Option (Read 3201 times)

Kabron Full Member Offline Posts: 172 Joined: Nov 1^st, 2015	VS2017 ESP32 Wrover No Hardware Debug Option Jul 7^th, 2019 at 9:15am	Print Post
	I see no " vMicro > Debugger > Hardware Debugger " option at all.

	Please Register or Login to the Forum to see File Attachments
	IP Logged

Kabron Full Member Offline Posts: 172 Joined: Nov 1^st, 2015	Re: VS2017 ESP32 Wrover No Hardware Debug Option Reply #1 - Jul 7^th, 2019 at 9:39am	Print Post
	The options appeared after several restarts. Fantastic...
	« Last Edit: Jul 7^th, 2019 at 9:40am by Kabron »

	IP Logged

Kabron Full Member Offline Posts: 172 Joined: Nov 1^st, 2015	Re: VS2017 ESP32 Wrover No Hardware Debug Option Reply #2 - Jul 7^th, 2019 at 10:02am	Print Post
	Options appeared, zadig driver installed, but debug failed with the message. I see JTAG port activity with the scope. The upload was via serial port. Is it correct?
	« Last Edit: Jul 7^th, 2019 at 10:06am by Kabron »
	Please Register or Login to the Forum to see File Attachments
	IP Logged

Kabron Full Member Offline Posts: 172 Joined: Nov 1^st, 2015	Re: VS2017 ESP32 Wrover No Hardware Debug Option Reply #3 - Jul 7^th, 2019 at 11:44am	Print Post
	Well, all this is not so simple as advertised. First, to connect to target I have to push EN button before. Then I got a message: "Cannot insert breakpoint 2. Cannot access memory at 0x400d11d7" Next I got: "Exception not processed" "The current stack frame was not found in the loaded module. Source code cannot be displayed for this location." etc, etc,etc In short, nothing works The most interesting in the attachment
	« Last Edit: Jul 7^th, 2019 at 11:48am by Kabron »
	Please Register or Login to the Forum to see File Attachments
	IP Logged

Tim@Visual Micro Administrator Offline Posts: 12210 Location: United Kingdom Joined: Apr 10^th, 2010	Re: VS2017 ESP32 Wrover No Hardware Debug Option Reply #4 - Jul 7^th, 2019 at 12:26pm	Print Post
	Hi thanks for testing, the GDB is new and will take a week or two for some boards to mature. Unlike other Visual Micro menus, the debug menus appear only when a project is open, there is also a new toolbar called "Micro Debug Options". No you should not need to press reset to start the board, we have not found that to be the case but will look at it. >> The Wrover has more options than other boards however the Optimization setting on the debug menu is very important for esp boards. What have you set it too? >> Upload using a different option to usb is set using the programmer menu options, should be same as Arduino IDE. >> Yellow box at the top of this page shows how to get hold of the current config. This shows us the tool chain and compiler optimization settings etc.
	« Last Edit: Jul 7^th, 2019 at 1:05pm by Tim@Visual Micro »

	WWW Facebook Twitter YouTube IP Logged

Kabron Full Member Offline Posts: 172 Joined: Nov 1^st, 2015	Re: VS2017 ESP32 Wrover No Hardware Debug Option Reply #5 - Jul 7^th, 2019 at 2:21pm	Print Post
	Got it working by excluding mistakelly included M5STACK support. Thanks a lot!


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›