Hi

F5 is Debug>Start and I explained in my last message that causes upload to fail. Serial upload on the Due is not possible when you connect the JTAG

Upload without JTAG connected and then plug in the ICE/JTAG and click "Debug>Attach". Do not click F5

In future release you will be able to use ICE for upload as well as for debug. Then you will be able to click F5



One last point, set the Optimization to "No project + libraries" or higher.

Please see the Debug menu at the top of the Visual Studio IDE. It contains the real names of the short cut keys you talk.

"Debug>Attach To Process"

There will be some videos produced during the coming weeks. It might be an idea for you to wait for them because they will answer a lot of questions.

This seems to be an internal visual studio error similar to the status bar error you encountered the other day.

The error says that visual studio can't find the standard american/english  (en) language files. We might have to report the issue to Microsoft as I suspect it is a VS2019 issue.

What languages show on your task bar? I assume you have maybe Italian as default? Does USA/UK (en) show as a language? If not please enable it. I am not asking you to switch from your language just to ensure the language support files are available to your machine for USA/UK

Thanks

If you try and press Debug > Attach to Process again it should have installed the extra tools (it downloads them the first time you attach to a board requiring them)

If not, can you confirm there is a folder on your PC:
C:\ProgramData\VMicro\tools\openocd-0.10.0.1

If not please post the "Micro Build" output after the failed attach, as this should now show the tool download if it is not installed:

Downloading tool to C:\ProgramData\vmicro\tools\openocd-0.10.0.1\openocd-0.10.0.1.zip
Installing tool.

This is my microbuild on debug fail connection
# MI Debugger Properties
{
  "serverLaunchTimeout": 5000,
  "filterStdout": false,
  "filterStderr": true,
  "targetArchitecture": "arm",
  "stopAtEntry": false,
  "externalConsole": false,
  "MIMode": "gdb",
  "MIDebuggerServerAddress": "localhost:3333",
  "cwd": e_x_dbg\\Debug",
  "MIDebuggerPath": -eabi-gcc\\4.8.3-2014q1/bin\\arm-none-eabi-gdb.exe",
  "MIDebuggerArgs": "",
  "debugServerPath": "C:\\ProgramData\\vmicro\\tools\\openocd-0.10.0.1\\bin/openocd.exe",
  "debugServerArgs": "-d2 -s \"C:\\ProgramData\\vmicro\\tools\\openocd-0.10.0.1/share/openocd/scripts/\" -c \"interface cmsis-dap\" -c \"cmsis_dap_vid_pid 0x03eb 0x2141\" -c \"set CHIPNAME at91sam3X8E\" -c \"source [find target/at91sam3XXX.cfg]\" -c \"init; reset halt\"",
  "program": Debug/ArduinoDueProject.ino.elf",
  "logging": {
    "moduleLoad": false,
    "trace": false,
    "engineLogging": false,
    "programOutput": false,
    "exceptions": false,
    "traceResponse": false
  },
  "visualizerFile": e_x_dbg\\Debug\\debugger_tmp.natvis",
  "showDisplayString": true
}

WOW!
WOW!
WOW!

Hi!
When do you think will to be ready a new version for  uploading + debuging using only ICE Atmel?

ciao
Marco

There will be a release over the next couple of weeks with a full range of programmer/uploader support. It involves a lot of different boards so will take a little time.

Please watch out for release notifications in the releases section.

Hi, I see the new versione 1908.04  is this the right version to solve my problem?
upload + debugging using Atmel ICE emulator
ciao
Marco

Hi yes of course, is a wrong word -emulator-. I want use your debug step by step using the Atmel ICE, including the uploading of the code via Atmel IC also
ciao
Marco