Hello the ESP-WROVER-KIT supports FTDI Debugging. Is there any support vMicro ??
https://www.visualmicro.com/page/ESP32-Debugging.aspx
I don't see the Menu Debug Hardware. Do I have to install an extra Addon ?

Oh Sure Sorry
I use to have Ver 1903.16.0 and updated it to 
Ver 1907.25.0
I was unable to install Ver. 1907.26.2 for Studio 2019
I got this 

Program ESP32_SSID_Table size: 665.898 bytes (used 34% of a 1.966.080 byte maximum) (5,15 secs)
Minimum Memory Usage: 39620 bytes (12% of a 327680 byte maximum)

# Copy build result to 'Project>Property Pages>Intermediate Directory'
# Destination:

Uploading 'ESP32_SSID_Table' to 'ESP32 Dev Module' using 'F2232H Dual RS232'
 

If I try to downlad the latest Version 
from this site
https://www.visualmicro.com/page/Arduino-Visual-Studio-Downloads.aspx
I get this
rror>
<Code>BlobNotFound</Code>
<Message>
The specified blob does not exist. RequestId:88e131ed-001e-0037-41c7-45653f000000 Time:2019-07-29T04:40:51.0121216Z
</Message>
</Error>

Thank you I installed Ver 1907/28/0
Still the same 

Info : Configured 2 cores
esp32 interrupt mask on
****[vMicro]**** Uploading App :Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : clock speed 2000 kHz
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: esp32.cpu0: IR capture error; saw 0x1f not 0x01
Warn : Bypassing JTAG setup events due to errors
Info : Listening on port 3333 for gdb connections
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: esp32.cpu0: IR capture error; saw 0x1f not 0x01
Warn : Bypassing JTAG setup events due to errors
Error during upload using programmer
The uploader process failed

The uploader process failed
The uploader returned an error
# Copy build result to 'Project>Property Pages>Intermediate Directory'
# Destination: 

I put Jumpers an TCK TDI TDO TWS 
Any other clue !!!

Sound fair for me Thank you I looking forward

First Thank you foe helping second there is no file board.txt
only boards.txt but I thing you mean platform.txt

###############################################
# DEBUG TOOL
###############################################
# Test VMicro
tools.openocd.debug.openocdscript=esp32-wrover.cfg
tools.f2232h.server.build.openocddebugger=ftdi/esp32_devkitj_v1.cfg 
tools.openocd.program.pattern="{program.path}/{program.cmd}" {program.verbose} -s "{program.path}/share/openocd/scripts/" -f "interface/ftd

i/esp32_devkitj_v1.cfg" -f "board/{upload.openocdscript}" -c "echo -n {****[vMicro]**** Uploading App :}" -c "telnet_port disabled; program {{runtime.platform.path}/tools/partitions/boot_app0.bin} 0xe000" -c "echo -n {****[vMicro]**** Uploading Bootloader :}" -c "program }.bin} 0x1000"  -c "echo -n {****[vMicro]**** Uploading Sketch :}" -c "program {{build.path}/{build.project_name}.bin} 0x10000"  -c "echo -n {****[vMicro]**** Uploading Partitions :}" -c "program {{build.path}/{build.project_name}.partitions.bin} 0x8000 reset; shutdown"
tools.openocd.upload.pattern="{program.path}/{program.cmd}" {program.verbose} -s "{program.path}/share/openocd/scripts/" -f "interface/ftdi/esp32_devkitj_v1.cfg" -f "board/{upload.openocdscript}" -c "echo -n {****[vMicro]**** Uploading App :}" -c "telnet_port disabled; program {{runtime.platform.path}/tools/partitions/boot_app0.bin} 0xe000" -c "echo -n {****[vMicro]**** Uploading Bootloader :}" -c "program }.bin} 0x1000"  -c "echo -n {****[vMicro]**** Uploading Sketch :}" -c "program {{build.path}/{build.project_name}.bin} 0x10000"  -c "echo -n {****[vMicro]**** Uploading Partitions :}" -c "program {{build.path}/{build.project_name}.partitions.bin} 0x8000 reset; shutdown"


##### GDB with Interface Specified for custom external debuggers
tools.openocd.debug.path={runtime.tools.openocd-espressif-esp32-10.0.1.path}
tools.openocd.debug.cmd=bin/openocd
tools.openocd.debug.cmd.windows=bin/openocd.exe
tools.openocd.debug.params.verbose=-d2
tools.openocd.debug.openocdscript=esp-wroom-32.cfg
tools.openocd.debug.args={params.verbose} -l "{{build.path}/{build.project_name}_DebugOpenOCD.log}" -s "{path}/share/openocd/scripts/" -f "{path}/share/openocd/scripts/interface/{build.openocddebugger}" -c "set ESP32_RTOS none" -f "{path}/share/openocd/scripts/board/{openocdscript}" -c "init"
tools.openocd.debug.address=localhost:3333

# debug.tool=f2232mm



# ESP32 PROG (Identical to  F2232H Dual RS232)
###tools.esp32prog.server.build.openocddebugger=ftdi/minimodule-lowcost.cfg
tools.esp32prog.args=-ex "set remote hardware-watchpoint-limit 2" -ex "mon reset halt" -ex "flushregs" -ex "thb app_main" -ex "c"
tools.esp32prog.path={runtime.tools.xtensa-esp32-elf-gcc.path}/bin
tools.esp32prog.cmd=xtensa-esp32-elf-gdb.exe
tools.esp32prog.pattern="{path}/{cmd}" {args}
tools.esp32prog.server.tool=openocd

# F2232H Dual RS232
### tools.f2232h.server.build.openocddebugger=ftdi/minimodule-lowcost.cfg
tools.f2232h.args=-ex "set remote hardware-watchpoint-limit 2" -ex "mon reset halt" -ex "flushregs" -ex "thb app_main" -ex "c"
tools.f2232h.path={runtime.tools.xtensa-esp32-elf-gcc.path}/bin
tools.f2232h.cmd=xtensa-esp32-elf-gdb.exe
tools.f2232h.pattern="{path}/{cmd}" {args}
tools.f2232h.server.tool=openocd

I tried this in platform.txt but I still get

but Studio is still asking for "interface/ftdi/minimodule-lowcost.cfg"
I remarked all Textfiles where does Studio gets this message. Could you be a little bit more specific please. 

I installed
Visual.Micro.Arduino.Studio_1907_29_3
same. I can't find the file board.txt. In what folder should it be.

Uploading 'ESP32_SSID_Table' to 'ESP32 Wrover Module' using 'ESP32 DEVKIT'
Uploader started for board ESP32 Wrover Module
Uploader will use programmer name: esp32devkit
C:\ProgramData\vmicro\tools\openocd-espressif-esp32-10.0.1\bin\openocd.exe -d2 -s s/" -f "interface/ftdi/esp32_devkitj_v1.cfg.cfg" -f "board/esp-wroom-32.cfg" -c "echo -n {****[vMicro]**** Uploading App :}" -c "telnet_port disabled; program {D:\Arduino.IDE\hardware\espressif\esp32/tools/partitions/boot_app0.bin} 0xe000" -c "echo -n {****[vMicro]**** Uploading Bootloader :}" -c "program {D:\Arduino.IDE\hardware\espressif\esp32/tools/sdk/bin/bootloader_qio_80m.bin} 0x1000" -c "echo -n {****[vMicro]**** Uploading Sketch :}" -c "program er\Debug/ESP32_SSID_Table.ino.bin} 0x10000" -c "echo -n {****[vMicro]**** Uploading Partitions :}" -c "program er\Debug/ESP32_SSID_Table.ino.partitions.bin} 0x8000 reset; shutdown"
Open On-Chip Debugger  v0.10.0-esp32-20190313 (2019-03-13-09:57)
Error during upload using programmer
The uploader process failed

The uploader process failed
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
debug_level: 2
embedded:startup.tcl:63: Error: Can't find interface/ftdi/esp32_devkitj_v1.cfg.cfg
in procedure 'script'
at file "embedded:startup.tcl", line 63
The uploader returned an error
# Copy build result to 'Project>Property Pages>Intermediate Directory'
# Destination:


 

We are coming closer 
dubble Extension ????
esp32_devkitj_v1.cfg.cfg

I changes in programmers.txt the line
esp32devkit.openocddebugger=ftdi/esp32_devkitj_v1.cfg.cfg to
esp32devkit.openocddebugger=ftdi/esp32_devkitj_v1.cfg
and then I get this again

Uploading 'ESP32_SSID_Table' to 'ESP32 Wrover Module' using 'ESP32 DEVKIT'
Uploader started for board ESP32 Wrover Module
Uploader will use programmer name: esp32devkit
C:\ProgramData\vmicro\tools\openocd-espressif-esp32-10.0.1\bin\openocd.exe -d2 -s s/" -f "interface/ftdi/esp32_devkitj_v1.cfg" -f "board/esp-wroom-32.cfg" -c "echo -n {****[vMicro]**** Uploading App :}" -c "telnet_port disabled; program {D:\Arduino.IDE\hardware\espressif\esp32/tools/partitions/boot_app0.bin} 0xe000" -c "echo -n {****[vMicro]**** Uploading Bootloader :}" -c "program {D:\Arduino.IDE\hardware\espressif\esp32/tools/sdk/bin/bootloader_qio_80m.bin} 0x1000" -c "echo -n {****[vMicro]**** Uploading Sketch :}" -c "program er\Debug/ESP32_SSID_Table.ino.bin} 0x10000" -c "echo -n {****[vMicro]**** Uploading Partitions :}" -c "program er\Debug/ESP32_SSID_Table.ino.partitions.bin} 0x8000 reset; shutdown"
Open On-Chip Debugger  v0.10.0-esp32-20190313 (2019-03-13-09:57)
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
debug_level: 2
none separate
adapter speed: 2000 kHz
Info : Configured 2 cores
esp32 interrupt mask on
****[vMicro]**** Uploading App :Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : clock speed 2000 kHz
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: esp32.cpu0: IR capture error; saw 0x1f not 0x01
Warn : Bypassing JTAG setup events due to errors
Info : Listening on port 3333 for gdb connections
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: esp32.cpu0: IR capture error; saw 0x1f not 0x01
Warn : Bypassing JTAG setup events due to errors
Error during upload using programmer
The uploader process failed

The uploader process failed
The uploader returned an error
# Copy build result to 'Project>Property Pages>Intermediate Directory'
# Destination:
 

Hallo
that is what I use
https://docs.espressif.com/projects/esp-idf/en/latest/hw-reference/get-started-w...

JTAG / JP2
.      ESP32 Pin      JTAG Signal
1      EN      TRST_N
2      MTMS / GPIO14      TMS
3      MTDO / GPIO15      TDO
4      MTDI / GPIO12      TDI
5      MTCK / GPIO13      TCK

A plain board.

Thanks for the image, and the only difference to the Espressif Setup docs I can see is the EN jumper being connected, though believe this is OK as still part of the JTAG link to the debugger (so expect it makes no difference)

When I have our Wrover module out of another project Ill double check all of this through and update with any other information.

There are some minor amendments to the board config to make within vMicro, however it should have worked more than it has at present.

If you just run the command line below, it should show JTAG setting up OK:
e.g "Info : JTAG tap: esp32.cpu0 tap/device found:"

"C:\ProgramData\vmicro\tools\openocd-espressif-esp32-10.0.1\bin/openocd.exe" -d2 -s s/" -f s/interface/ftdi/esp32_devkitj_v1.cfg" -c "set ESP32_RTOS none" -f s/board/esp32-wrover.cfg" -c "init" 

If this shows (as before) "JTAG scan chain failed", can you confirm you can upload using normal Serial?  And that all Jumpers are in place fully?

I get the JTAG error when I have missed a jumper off the board...

This software is common to both the debug and upload with programmer, and if this doesn't work it is outside vMicro, as the above is what Espressif detail on their pages:

https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/jtag-debugging/...

I think that's what Simon was hoping to see. He posted an update last week for the wrover but it was no use until we got the power issue resolve.

Please update to the "work in progress" release from the releases section of this forum, see link below (1907.31+). It's not in the gallery yet.

https://www.visualmicro.com/forums/YaBB.pl?board=VS_ARDUINO_EXT_RELEASES

I have Version 4.1 And what should I do wrong I just can put the Jumper  on the right spot.
Wait I'm moving 11.9 to Majorca and then I have 2 new Wrover Board available. The we can go on. THX for helping me

Thanks for the update, and glad to hear it is all working now.

Some additional links will appear when selecting the debugger, and the best place to begin is the Arduino GDB in Brief page: 
https://www.visualmicro.com/page/User-Guide.aspx?doc=Arduino-gdb-In-Brief.html