Hallo,
I try to upload a simple program (blink) to a Adafruit Feather M4 (STM32F405)https://learn.adafruit.com/adafruit-stm32f405-feather-express using the upload method "STLink 2.1 + OpenOCD (vMicro)".

Uploading does not work and I got the output:
...
Info : device id = 0x10076413
Warn : Cannot identify target as a STM32 family.
Error: auto_probe failed
embedded:startup.tcl:476: Error: ** Programming Failed **


The Command line executed is:
C:\ProgramData\vmicro\tools\openocd-0.10.0.1\bin\openocd.exe -d2 -s "C:\ProgramData\vmicro\tools\openocd-0.10.0.1/share/openocd/scripts/" -f "interface/stlink-v2-1.cfg" -f "target/stm32

f3x

.cfg" -c "echo -n {****[vMicro]**** Uploading ELF :}" -c "reset_config; telnet_port disabled; program {{C:\Users\ms\AppData\Local\Temp\VMBuilds\CIE-Test\STM32_~1\Debug/CIE-Test.ino.e
lf}} reset;reset_config;shutdown"

I think the problem comes from the wrong script because it is not a STM32F3x, it is a STM32F405. How can I change this ?

The selected board is "Generic STM32F4 series -> Adafruit Feather STM32F405".

Best regards,
Marco

Thank you. It works now.

Thanks for the information, we will double check these before the next major release.

It appears this config is not in the version of OpenOCD which is integrated with vMicro at present, but it seems others have authored this config in the meantime (an example at the below link).  If you download this and drop it into the "C:\ProgramData\VMicro\tools\openocd-0.10.0.1\scripts\target" folder on your PC, and then try it again.

https://github.com/ntfreak/openocd/blob/master/tcl/target/stm32h7x.cfg

We can integrate these in future builds, and if this works please let us know.

I didn't see this relies on an update to OpenOCD as you say, and we have a new version which can be tried in advance of the release. 

1)  Download Updated OpenOCD ZIP and Extract to "C:\ProgramData\vmicro\tools\" (so you should have a new openocd-0.10.0.20200213 folder within tools)

2) Add the below to a local board.txt in the project for the STM32H7x board
Code:

# Local Board.txt Configuration for STM32H7x and Updated OpenOCD Download
tools.openocd.upload.path=C:\ProgramData\vmicro\tools\openocd-0.10.0.20200213
tools.openocd.debug.build.openocdscript=target/stm32h7x.cfg
tools.openocd.upload.openocdscript=target/stm32h7x.cfg
tools.openocd.upload.openocddebugger=stlink.cfg
tools.openocd.upload.pattern="{upload.path}/{upload.cmd}" {upload.verbose} -s "{upload.path}/scripts/" -f "interface/{upload.openocddebugger}" -f "{upload.openocdscript}" -c "echo -n {{upload.elf.message}}" -c "reset_config; telnet_port disabled; program {{build.path}/{build.project_name}.elf} reset;reset_config;shutdown" 

3) Now the commands should run as expected for both upload and debug for this board

Let us know how it goes if you have time to try this out.

No problem, and great to hear its all working on all boards now, thanks for the additional testing.